Author |
Message |
Squishy
| Posted on Tuesday, October 23, 2007 - 08:34 pm: |
|
Does anyone know how to mod a stock flasher to eliminate the open /short indicator circuit? |
Squishy
| Posted on Tuesday, October 23, 2007 - 08:38 pm: |
|
It's an '03 XB9S |
Rah7777777
| Posted on Thursday, November 08, 2007 - 09:09 pm: |
|
not too sure exactly what you are talking about? Did you convert to LED signals? |
Eshardball
| Posted on Friday, November 23, 2007 - 09:00 am: |
|
I have the same issue. Put on read LED signals and the flasher doesn't work. There is a vendor on E bay that sells a 50 watt resistor @$10/ signal. Sounds like crap. A standard Radio Shack resistor in line with the + on the signals should simulate the load that a regular lamp generates. The only question is what value at 12volts is required? |
Arctic9r
| Posted on Saturday, December 22, 2007 - 09:46 pm: |
|
the standard kuryakyn black load eqaulizer from your HD dealer should work just fine |
Lady_asb
| Posted on Sunday, December 23, 2007 - 02:22 am: |
|
This will fix your problem and is plug and play: http://www.americansportbike.com/shoponline/ccp0-p rodshow/16086.html |
|