G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dave_02_1200 Posted on Monday, October 08, 2007 - 08:53 pm:        Do any of you have any experience with carbon fiber? I want to make some body parts, etc. of epoxy-reinforced carbon fiber and need some basic information on the process. I have done some epoxy/fiberglass fabrication so I am comfortable with epoxy but I have never used CF and I don't want to waste too much in the learning process because it costs a lot more than s-glass. Any advice regarding the process or information sources would be appreciated. Dave   Beatx1 Posted on Tuesday, October 09, 2007 - 12:27 pm:        Look on the Aircraft Spruce and Specialty web site www.aircraftspruce.com. Their catalog is loaded with info. I never used the web site but it might just have some.   Oldog Posted on Tuesday, October 09, 2007 - 02:51 pm:        contact "Black sunshine" from the 3% he works with the stuff. also check the KV there were some threads on how to do it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: