Author |
Message |
Pso
| Posted on Monday, October 08, 2007 - 08:15 pm: |
|
I had a bracket that I purchased on this site about a year ago.It was the very nice bracket that fit under the front headllights. It finaly broke and I understand that they are no l;onger making them.I have PIAA's. Those are the little bullet shaped lights. Any ideas or suggestions about afermarket brackets for these little lights? |
Florida_lime
| Posted on Monday, October 08, 2007 - 08:59 pm: |
|
http://www.badweatherbikers.com/buell/messages/142 838/307592.html I just received the 3/8 aluminum CNC'd bar made by Gary -- excellent value for the PIAA 510, not sure if it will work with the ones you have. |
Xbimmer
| Posted on Monday, October 08, 2007 - 09:29 pm: |
|
Pso if it's the Ulytility bracket just get it heliarced. Mine broke off completely on the right side and spiderwebbed on the left. Had it put back together two weeks ago and all is still well although I'm working on a semi-passive reinforcement for it. I have Lorazepam's OK to post the pix but current events have kept me away from the project. The bar Florida refers to is great also but I don't think it would work with my Hellas which I intend to keep. Weld it and run it! |
Pso
| Posted on Tuesday, October 09, 2007 - 08:29 am: |
|
Gary-PM sent |
Xb12lp
| Posted on Tuesday, October 09, 2007 - 02:40 pm: |
|
I also bought the bracket from Gary. Great piece at a low cost. Works better than the one I made and looks better. I highly recommend to all......Thanks Gary |