| Author | Message | ||
     1324 |
Not really for sale, but here it is. I'm just looking to swap the bars out for some of the -7 degree bars. I've been told that the bars are interchangeable, but I guess we could do the whole assembly, its just as easy. Anyone? | ||
| Torquemonster |
I just bought some 7 degree, but havent installed them yet. If I find that I dont like em, Id be glad to swap with you. | ||
| 1324 |
Cool, keep me posted. Not sure what you ride, but I should point out that mine are for an XB. Not sure if the bars themselves are interchangeable between kits on XBs and tubers... | ||
| Aznlightning |
Interested in either one of your bars. Let me know if you guys deciede to sell and not trade. Thanks. | ||
| 1324 |
I like the bars so much that I'll never sell them. I'm only looking to trade for the -7 degree bars because I want something to bring my body into the bike a little tighter. Otherwise, they are fantastic bars and are leaps and bounds better than the stock Lightning bars. | ||
| Torquemonster |
Shoot...mine are for a tuber.I know the plates differ in shape/size, but do the channels that are cut into the bars differ? I dont know. Never seen xb x-roads bars before. (Message edited by Torquemonster on October 02, 2007) (Message edited by Torquemonster on October 02, 2007) | ||
| Devdawg |
1324, I've got a set for a tuber...if they'll work for you let me know. I might be interested in your stock bars if you still have them. let me know, Carl | ||
| Torquemonster |
Can anyone confirm that the bars will swap? Swapping pics & measurements is just a pain in the a$$. Mine are 7 degree down x-roads for TUBER(m2) His are 0 degree x-roads for XB Thanks in advance. (Message edited by Torquemonster on October 03, 2007) | ||
| 1324 |
If we can figure this out that would be great. Otherwise, as soon as I get back in town on Friday, I can measure these up to get close. I can't even find a website for these bars...anyone have that? I'd contact the manufacturer if I could. | ||
| Torquemonster |
Nick-worst case scenario- we can measure and compare the digits. Ill post it up in knowledge vault, though. Were sure to get a knowledgeable answer there (Court?!) | ||
| 1324 |
I sent you an email, but I'll post it here as well. I contacted Al at American Sport Bike about this and his response is as follows: The -7 bars are the same on X1, S1, and XB bars. They are different on M2 bars, which are longer. The 0 degree bars have the same tongue and groove and the same bolt pattern as the others. But they are .7" shorter per side. On a tuber, this very likely results in the switch pods hitting the tank at full lock. Al |
