| Author | Message | ||
     Slowride |
I have a center stand for a tube frame Buell. I purchased it off of a vendor here on bad web about 3 years ago. It is a two piece unit that has the U shaped bottom half, with adj. "C" slider for hooking in under the footpegs and the second piece is the long handle that will rotate forward or backwards to lift the bike off the ground. It is an anodized gold color and I added non-skid to the fame to ensure grip. I used it a lot with my M2 and X1, but find no use for it now with my Uly. See below for pictures. $75 + shipping (Message edited by slowride on September 11, 2007) | ||
| Mikej |
Here's a link to one probably just like it that sold recently in case anyone wants to see what it looks like: http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=21&post=952748#POST952748 I assume this is what your's looks like:  Imagelinked from above linked page | ||
| Slowride |
MikeJ That would be it! The non-skid tape was added to the long arm and the bottom of the U. The one I am selling looks as good as the one in the pic. Thanks MikeJ for the Pic.... | ||
| Zenfrogmaster |
PM sent! | ||
| Slowride |
Sale Pending!!! | ||
| Fasted |
i've got that stand. someone is getting a great deal for $75 the nonskid is an excellent addition. a small bottle jack under the crankcase will lift the front wheel off the ground to remove front wheel. the stand stabilizes the rear end and makes the job easier and safer. btw, ALWAYS leave the kickstand down when working on the bike alone.that way you can lower the bike to the ground without having to worry about stabilizing it as well. its kinda heavy. unless you are very strong, picking one up off the garage floor is tough....or so i've heard | ||
| Mikef5000 |
If the sale doesn't go through, Please PM me next! | ||
| Billetmetallic |
fasted, you mean the front shock eye mount for lifting with the bottle jack right? | ||
| Fasted |
no, i mean the flat area of the case just forward of the mount. am i doing something wrong and/or dumb???? tell me more...i don't need to make any more mistakes.........  | ||
| Smoke |
it is easy to punch a hole in the cases. i have a cut down 1x4 i put between the jack and the case or jack from the shock mount. since i put rear sets on the s1 i have been using that stand on the rear spools of the track bike. it won't lift up at the pegs anymore. | ||
| Fasted |
ooops......thanks for the warning and info | ||
| Dyerschaos |
if sale falls thru i will buy it!! pm sent.. |
