| Author | Message | ||
     Big_koch |
Bought a factory tach kit for my 2000 M2 about 6 months ago, installed and used it for awhile and then just recently decided to shave the gauges completely off. In good condition with the tach, dash, grommets, bolts, etc... Only problem is I had to cut the wires b/c I couldn't remove the pins from the harness once I got them in there. Have to go to HD and get some new pins to crimp onto the wires and you're set. | ||
| Spiderman |
Is it the billet or plastic dash? | ||
| Big_koch |
Black plastic | ||
| Guell |
will it work with my 97 m2 and how much are you asking for it? | ||
| Big_koch |
It was on my '00 but I don't see why the older bodywork would affect the gauges. I'd take $65 and shipping. (Message edited by big_koch on September 03, 2007) | ||
| Spiderman |
If you don't sell it here you may wanna put her on ebay.. http://cgi.ebay.com/ebaymotors/Buell-Cyclone-M2-Ta ch-tachometer-gauge-kit_W0QQcmdZViewItemQQhashZite m220144599613QQitemZ220144599613 | ||
| Guell |
Big_koch, you take paypal? Ill take it. | ||
| Big_koch |
Sure do. Charleston, SC? Shouldn't be more than $10 to get it to ya. $75 to koch39 @ aol.com and I'll send it on its way. I think you're the first fellow 21 year old I've seen on here. And with a black M2. Enjoy! | ||
| Mikef5000 |
Must be something about us 21 year olds... cause I would've taken that in a heartbeat if he didn't. | ||
| Guell |
Ill paypal ya after dinner, thanks. | ||
| Guell |
Money sent, do i need to relocate my ignition to the dash now? | ||
| Cyclonecharlie |
Matt, It's not necessary, you can plug the dash hole......Charlie | ||
| Guell |
Thanks for the info Charlie, i still might relocate it to the dash, i would prefer it to be there anyways. Matt | ||
| Guell |
Tyler, has the tach been sent out yet? Thanks Matt | ||
| Big_koch |
Dropped it off last night at the UPS store so it should be on its way. I'll see if I can find the tracking number for ya. | ||
| Guell |
awesome, thanks |
