| Author | Message | ||
     Phat_j |
250.00 | ||
| Shaiss |
what is this? pictures? | ||
| Phat_j |
its a mikuni carb...... dont have any pics of the actual one, but. http://mikuni.com/fs-carburetor.html... | ||
| Bluesboy |
How about a stock S2 seat trade?LMKB.B. | ||
| Brinnutz |
New, used? condition??? | ||
| Phat_j |
i've got a stock s2 seat...... need one? condition is very good used....only reason i'm sellin is needed a bigger carb.... (Message edited by phat_j on July 30, 2007) | ||
| Phat_j |
deal fell through, still for sale......... | ||
| Twowheel253 |
Is it in good working condition? Do you know if it has the throttle cable bracket for Buells or for Big Twins (they're different). | ||
| Phat_j |
its off my s2 and is in great working condition.... (Message edited by phat_j on August 01, 2007) | ||
| Twowheel253 |
Do you know what kind of jet-kit/needle is installed (if any)? Do you have spare jets/needles? Are the idle adjust and choke cables still attached? Can you email me an actual pic? (Message edited by twowheel253 on August 02, 2007) | ||
| Phat_j |
idle adjust cable is still attached, you will need your choke cable off your stock carb..... it has jets and needles in it that tuned for my bike.... no other jets are included as i have a complete set that i use to tune customers bikes... | ||
| Phat_j |
ok, new price........ 225.00 includes shipping......... i know somebody wants to upgrade. | ||
| Bluesboy |
I have a thunderstormed S2 w/race header & muff,the Edelbrock carb that came stock needs to go.Possable trade & cash?LMKB.B. | ||
| Phat_j |
sorry, i have no need for that pos they called a carb on the cali bikes.... i might consider something else on trade, but not that thing, lol...... now if you want to change to a cv, i've got a few of them layin round.... | ||
| Bluesboy |
Sorry i bothered you P.J. | ||
| Morvant1200 |
May be interested Phat. Gotta figure something else out first. I'll get back with you - if i need it - and you still have it - we'll work something out. Thanks | ||
| Phat_j |
was no bother....but as i said, if u wanna upgrade to a cv, lemme know. | ||
| Phat_j |
lots of peeps interested but nobody pulled the trigger yet..... who wants to upgrade? | ||
| Djkaplan |
Trade? Unknown vintage and make, but straight XL chopper frame.  XRUJ Vanson/Buell Armored jacket-Large, never worn, just tried on.  http://buell.com/en_us/gear/apparel/Product.asp?Menu_ID=1&CategoryID=4&ProductID=4009 | ||
| Smoke |
j, i'll trade 225 cash for it. tim | ||
| Mikej |
Threadjack: DJ, what do you need for the frame? Any numbers or VIN info or MFGR info on it for DMV/DOT purposes? Any guess on the age of it? Quality of build and welds? Or just some tubes welded together that you got in a swap somewhere? Just curious at this point (even though I still have that old tail light I'm looking to build a bike around). Thread-unjacked.... you are now returned to your previously scheduled bid fest. | ||
| Djkaplan |
"Any numbers or VIN info or MFGR info on it for DMV/DOT purposes?" Nope... it's all been ground off and smoothed over. "Any guess on the age of it?" Early 70's most likely. It's for an iron XL, I was told by the guy who I got it from. "Quality of build and welds? Or just some tubes welded together that you got in a swap somewhere?" The welds are so-so and the frame looks straight, but it'll need reinforcing for modern power. The tubes are very small diameter and spindly... this frame could have been an early weld together kit from a bygone era. What's left of a springer front end is what's up front. The rest is lost to the ages. It's previous owner is in "the life", so there is no telling what provenance this frame may have. If I can't unload it for something, I'll build a bobber out of it... someday. I was eyeing an old CR500 and wondering if I could make a moto-bobber... that might be fun. | ||
| Mikej |
Could be a fun project to play with. A 500cc engine would be fun in it. | ||
| Phat_j |
sold to the smoke show........ |
