| Author | Message | ||
     Tattoodnscrewd |
Hey all ... Have a few parts again that I need to try to clear out of the garage .. -Sand cast primary cover and cam cover - both good shape - no gouges or anything - perfect for polishing or powder coating (take-off's from my 99 M2 - replaced them with the polished ones off my S1)... -Still have the black S1/X1 fender ... -Original black front fender from my S1 - it is cracked on one of the lower legs that cover the fork, still solid - would be good for use one the track - save your good parts ... -Trimmed rear hugger off the 99 M2 ... -Still have the stock seat from the 99 M2 - does have a small crack in the material ... -Swingarm/engine mounting block - don't know if there is a difference between models- but it came off a bike with the later swingarm ... -Still have the complete top-end off the S1 (cylinders, pistons, complete heads, rocker boxes and covers) ... -Stock swingarm brace (without the black plastic front sprocket cover) ... -Fly screen brackets (without the headlight ears off the S1 - replaced with X1 one piece mounts) ... -Stock foot controls (without pegs) from the 97 S1 ... -Toe peg from the 99 M2 (the small stock rubber one - used briefly before I tapped the hole for the pro-series toe peg) ... -Stock front motor mount (with airbox arm - got 2 of them) ... -One 'mickey mouse ear' mirror ... -Chrome carb support/mounting bracket ... Will entertain any reasonable offers .. pictures are available if needed ... (I have posted most of these parts at one time or another ) | ||
| Rellim51 |
How much for the front fenders? | ||
| Grunto3 |
How much for the cam cover. My zip is 53004.E-Mail dmccormick2@wi.rr.com | ||
| Rotzaruck |
Hey Tatt!! If that toe peg is what I think it is: the little rubber wrapped piece that screws into the shifter to hook your toe or stomp on. And assuming it's straight and not the ninety degree version I have; and if the mirror is similar to an 02, and you can use it to see where you have been, put'em in a box and send 'em South. Tell me how much money to send you. And, since I haven't gotten around to asking anybody, and you've recently taken one off, Is there anything special that holds the rear brake lever on except a hardened bolt and a washer? I'm thinking mine must have had a plain old walmart bolt and I stomped the thing in two when I was sailing down that hill. Thanks Ed | ||
| Tattoodnscrewd |
Rellim - Figure $75 shipped (In the U.S.)for both fenders Grunto - Doesn't seem like you are too far from me (I'm in Milwaukee) .. ride out meet halfway - maybe Port Washington.. I'm thinking $50 for the cam cover ? Rotza ... Paypal me 10 bucks to basically cover shipping and I'll get both pieces out to you ... the mirror isn't perfect, and the toe peg is cheap, even new ... as far as the brake pedal .. it doesn't seem like much, a normal little bolt and washer that holds it on, but that's all there is - cheap dealer part, or hardware store... | ||
| Tattoodnscrewd |
Paypal to bkurtz@wi.rr.com if anyone is buying... | ||
| Medic352 |
How much for the top end? | ||
| Tattoodnscrewd |
Make me an offer ... I was looking to get $400 for it .. shoot me a PM Brian | ||
| Tattoodnscrewd |
Apparently I have been having issues with my e-mail server .. I have since switched the e-mail address registered with Badweb ... If anyone has tried to contact me and has gotten their message bounced back or no response, please forward the message to tattoodnscrewd@wi.rr.com Thanks Brian |
