| Author | Message | ||
     Xbullet |
i'm about to do the old 10K service, and was thinkin' that since i gotta change the fork oil, i might as well look into springs. haven't made up my mind. i'm lookin' for opinions, and i know you guys have 'em.....  i'm lookin' at the buell pro series kit (front and rear), but would consider others. what do ya think? | ||
| Buellshyter |
I went with the Pro springs and give it two thumbs up....cheap price too | ||
| New12r |
Ship em to Traxxion Dynamics in Woodstock, expensive but they handle GREAT! I rode Smoke's SV with their stuff and was really impressed. BTW, dont you think you should get it running first!  | ||
| Coops53233 |
Someone correct me if I'm wrong, but I think the Pro-Series springs are only for the larger 43mm forks. I dont think they'll work on a 9. | ||
| Metalstorm |
05+ 9Sx & 9R have the 43mm forks 03-04 9S & 9R have 41mm forks Pro series springs are definitely for the 43mm forks so basicly they'll work on all 05 & later XBs excluding the 12Scg which still has the older 41mm forks. The 12Ss & 12X are excluded as well I believe due to fork lenghth. (Message edited by metalstorm on June 15, 2007) | ||
| Slaughter |
Traxxion can get you the springs for the "old" 41mm tubes. I had them re-do my first set of 2003 forks (also re-valved) AND my set of 43mm forks (with AK20 Cartridges now installed) Shoot them an email, they are good about responding. | ||
| Hkwan |
So the fork/suspension should be over-hauled at 10k miles? | ||
| Skully |
So the fork/suspension should be over-hauled at 10k miles? The only service item regarding the suspension that my manual calls for is replacing the fork oil at 10,000 mile intervals. | ||
| Firebolteric_ma |
G.M.D Computrack of boston did mine. New Springs & Revalved, The differenve was night and day. I thought they handled pretty dang good before, But now They are superb! (Message edited by firebolteric_ma on June 16, 2007) |
