| Author | Message | ||
     Af226 |
I'm taken of the muffler to drain my primary and low and behold something is rattling around in my can...the coupler and screen are flopping around loose inside. Guess now I know where the rattle was coming from. Anybody got specific details on how to fix/repack my slipon?   Any help is welcomed. Tx Brad. | ||
| Joesbuell |
Go buy yourself a hot dog(resonator) with the same diameter baffle as your one pictured above. Cut the ends off and weld it into your Vance, you may need to drill out the old rivets on your Vance. You can use the packing out of the Hot Dog or buy some extra from a bike shop. These hot dogs are designed to have the exhaust gas flow a certain way so make sure you check this before welding it in! I have personally done this repair/Mod on previous bikes. Still get a great sound with good back pressure. Here's a picture of the Hot Dog with no sauce or mustard!  Cheers Jodie  |
