| Author | Message | ||
     Jagpor |
For tuber Brembo gold 4 piston dual conversion with gold center Brembo full floating rotors and adapters (Brake Tech) with braided line, used very little 600.00 Rear Black 4 piston Performance Machine caliper and bracket for stock rotor 250.00 Front and rear Performance Machine polished wheels; later style without slots, front has an area that has been blended and repolished to remove small curb rash 450.00 Front and rear white Marchessini wheels very nice 250.00 Complete S2 WP front end with triples and axle; was told by previous bike owner that valving/spring work had been done but can’t verify; very nice with good seals. This is the front end that had the clipons mounted above the triples and is 2 inches longer than others 30 inches from top of tube to center of axle. This is the one for building Mutant, etc as it gives a little more ground clearance when tubes are pushed down flush with top tree. 400.00 Marvic magnesium 3 spoke 3.5x17 front wheel with Performance Machine oversize 330 mm full floating cast iron rotors and 2 black 4 piston PM calipers with adapters to fit early GSXR front end. Extra new set of EBC green pads. This was a complete kit by PM for early GSXRs. I had this set up on an early GSXR front end that I adapted to tube Buell but calipers could be adapted to tube Buell front end very easy and matches to the rear caliper that I have for sale above. Tremendous stopping power and very light wheel. Wheel is currently stripped for color change. Set up for 20mm axle but could be changed and has not been drilled for speedo drive. The wheel matches to 3 spoke Buell wheels very nice. Don’t want to separate at this time. 700.00 Complete S2 front fairing with bracket, headlight, mirrors, etc. never wrecked or down 200.00 Complete S2 dash with speedo and tach minus idiot lights 100.00 S2 “swan neck” 1 inch clipons make offer S&S Super E complete kit with manifold, air cleaner, etc. new 300.00 Dyna mini coil dual coil, dual fire black 3.0 ohm new 40.00 XB 2007 lightning triples top and bottom very nice 125.00 Want to buy for XB front rotor, front caliper, front axle, rear wheel, rear axle, rear caliper bracket jagpor@hotmail.com for pics and more info. All prices do not include shipping. I am in Okla. 73003. I can take paypal. My ebay username is jagpor with 700 feedbacks 100 percent positive for reference. | ||
| 95s2 |
PM sent | ||
| Jagpor |
The swan neck clipons are just the goofy bend 1 inch bars as stock on 95 S2. Sorry for any confusion. | ||
| Jagpor |
Marvic wheel and matching rotors are sold. 4 piston PM calipers are still available. | ||
| Jagpor |
I forgot to mention that a Nissin mastercylinder is included with the front Brembo dual conversion. Here are some pics of the front and back brakes. | ||
| Jagpor |
 | ||
| Jagpor |
 | ||
| Jagpor |
 | ||
| Jagpor |
 | ||
| Jagpor |
OOPS, picture of right side front does not show the caliper attached to the adaptor and forks. | ||
| Jagpor |
The S2 fairing and dash have been sold. | ||
| Jagpor |
The dual Brembo front brake conversion has been sold. Rear 4 piston PM brake is still available. |
