G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Marc340 Posted on Thursday, March 22, 2007 - 09:00 pm:        Just receive my direct link today from AL american sport bike very good service . will try that and give some new   Nell Posted on Tuesday, May 15, 2007 - 12:01 am:        so how do you like it ? have you had any good results? how is the new performance on the top end?   Alxsrq Posted on Tuesday, January 29, 2008 - 10:42 am:        Hi guy's and gal's, quick question regarding tuning with direct link. The dyno technician where i've taken my bike tells me he can tune my bike but will have to leave the O2 sensor unpluged after he finishes. I know my check engine light will still on but my real question is, is this the best way or recommended? Mods to the Firebolt 12R are full Micron serpent, open airbox, K&N filter, Revs ported heads, 1250 kit pistons etc. I have a map from American Sport Bike that works but seems to need some tweeking after these upgrades. Any input would be greatly appreciated!   Id073897 Posted on Tuesday, January 29, 2008 - 01:09 pm:        If you disconnect the O2 sensor, the ECM loses it's ability to learn a new AFV to cope with changing air pressure. Thus it will be your task to adjust the AFV in respect to the current air pressure. This is like rejetting a carb. If you adjust the error mask correctly, you will get no flashing engine lamp due to the missing O2 sensor. Regards, Gunter

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: