Author |
Message |
Tvuser
| Posted on Wednesday, April 18, 2007 - 09:54 pm: |
|
I just got my feeling hurt,my xb12s w/micron,k&n,race ecu,desnorkeled made 87 ponies. I want to bust the ton at the rear wheel. What will it take?Also this was with no air/fuel meter so I dont know a/f |
Tim
| Posted on Thursday, April 19, 2007 - 07:12 pm: |
|
Check out the exhaust shootout on the American Sport Bike site. It shows 105 peak HP at 6700RPM with the Micron and some other bits and pieces. That said, dynos will vary, etc, etc. |
Al_lighton
| Posted on Friday, April 20, 2007 - 09:39 am: |
|
The dyno used for the testing was a "happy" dyno. The absolute values in the testing were about 5-6% higher than what a "normal" Dynojet 250 would yield. We've hit 101 RWHP with the Micron/open airbox/remapped configuration with no correction factor funniness, on a sea level dyno with the same settings where a stock XB12 routinely gets 89-90 RWHP. And that is with a pretty nice curve shape as well. So it is doable with just external bolt ons, but just barely. Al |
Tvuser
| Posted on Friday, April 20, 2007 - 11:09 pm: |
|
I've got the boltons so what gives with my 87 horsepower.I'm about sea level.I need better answers. |
|