G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   M2buelligan Posted on Sunday, April 08, 2007 - 02:03 am:        All I need is the torque specification for the cam cover screws of a 99 M2 Cyclone. Thanks for any help given.   Smoke Posted on Sunday, April 08, 2007 - 08:07 am:        there is also a sequence of torqueing. i think that there is a downloadable version of the s1 manual in the knowledge vault. same torque. tim   M2buelligan Posted on Sunday, April 08, 2007 - 12:29 pm:        Thanks Smoke, I tried the S1 manual but it wouldn't open for me. I bought a cam cover trim kit. I only have to remove 4 of the screws io install it. Thanks again   Ragnagwar Posted on Monday, April 09, 2007 - 08:28 am:        Hope this helps, taken from 99/00 Cyclone manual.   M2buelligan Posted on Monday, April 09, 2007 - 07:29 pm:        Awesome!! Thanks so much.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: