| Author | Message | ||
     Onahog |
Can anyone tell me what a 25649-91 S/e cam kit has for cams?..i need to no the part #s of the back side..Im trying to determine if this is what mine are..Thx..Hankb | ||
| Rick_a |
A down and dirty easy method to check is to measure the cam at the base circle and then at the widest point (using a vernier or micrometer), subtract the smaller from the larger and that'll get you the approximate cam lift. Multiply that by the rocker ratio (1.62) and that will give you a rough valve lift figure. (Message edited by Rick_a on March 22, 2007) | ||
| Onahog |
Thx...I am still trying to determine which cams these are for sure by the #s on them.. The heads are thunderstorms with stock springs and as stated, 2 bent exhaust valves when i got it....Hankb,, |
