Author |
Message |
Ezblast
| Posted on Saturday, March 03, 2007 - 11:54 pm: |
|
I did the adjustment as it said to in the book, shift to 3rd so detent plate is as the picture in the book to do the adjustment, adjusted per spec - done. Now I can't get it back into neutral - why? - should I try rolling it a bit to turn the gears? GT - JBOTDS! EZ |
Ezblast
| Posted on Sunday, March 04, 2007 - 11:48 pm: |
|
I Found Neutral - rocking the bike and rolling just a bit, no light but neutral - it will do, opened the gasket, non-metal, but not paper either - thought I had it lined up, but the bottom buggered up, now I have to get a new gasket again - argh! GT - JBOTDS! EZ |
Chevysolid
| Posted on Wednesday, January 16, 2008 - 08:52 pm: |
|
Ez, did everything end up ok when doing this I am doing the same on a 2000 X1... Anything I should know about.. |
|