G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ceejay Posted on Wednesday, February 21, 2007 - 11:52 am:        Both are new, but have been installed for mock-up/layout purposes. Vortex is a 54t for the buell 3 spoke wheels and the PBI is a 24t chromed, both in 520 pitch. I also have the chain(RK), which has never been used either, but does have a bit of dirt/dog hair/shop grime from it hitting the floor a few times. 130 bucks for everything, or will seperate-40 bucks for vortex, 15 for PBI, and 95 for the chain. Buyer(s) to pay all shipping charges. Please feel free to ask any questions.   Chevysolid Posted on Wednesday, February 21, 2007 - 03:49 pm:        Are these direct install on an X1?? (sprockets) and are they compatable with the stock belt??? Speaking of stock, what is the stock teeth on the X1? I have been looking at doing something to get step up the gear ratio for better cruising RPM and a little less low end...   Ceejay Posted on Thursday, February 22, 2007 - 07:15 am:        Sorry Mr. Solid, this is a chain conversion. I have all the necessary spacers made up for the output shaft and the wheel ifnyer still interested, but this is pretty close to a 27 61 set-up as is stock on the buell tuber belt drives, both being a 2.25.   Ceejay Posted on Thursday, February 22, 2007 - 12:46 pm:        sold pending payment...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: