Author |
Message |
Sandman865
| Posted on Tuesday, February 20, 2007 - 08:02 pm: |
|
I was doing some indos, and the bike died. I went to restart and the fuel pump never started and the gauges never reset like normal. I was wondering if anyone had any ideas |
Indy_bueller
| Posted on Tuesday, February 20, 2007 - 08:11 pm: |
|
My first reaction would be to check the fuses. The reason I say that is because I had the same thing happen once, but it started working again after I pulled out and reseated all the fuses. The only difference was that I wasn't doing stoppies. After that I would start looking at the wiring and see if something didn't get pinched, worn through or damaged in some way. |
Cmm213
| Posted on Tuesday, February 20, 2007 - 08:18 pm: |
|
Indy is right, something is not letting the pump turn on . Sounds like some electrical gremlin to track down |
Saintly
| Posted on Tuesday, February 20, 2007 - 08:33 pm: |
|
I was doing some indos Are "indos" the same as "stoppies"? If so, check the tip over switch. It shuts down the fuel pump when the bike exceeds a certain angle. It could be stuck. Try unplugging it altogether. The bike will run with it unplugged, although it will run poorly and throw a code. |
Ft_bstrd
| Posted on Tuesday, February 20, 2007 - 10:27 pm: |
|
Indos = Former BMX rider! |
|