Author |
Message |
Danny_h__jesternut
| Posted on Monday, February 05, 2007 - 09:53 pm: |
|
I have seen two kits for setting up a Tuber with twins up front. Both use Brembo 4 pot calipers with 320mm rotors. Who makes and where do I find these 320mm rotors that fit the bolt patern for a Buell Tuber rim? Now lets move on to calipers. Nissin 6 pots, made for a 320mm rotor with a 90mm center to center mounting holes should fit?? Is it 90mm C to C mount holes on the upside down Tuber forks??? |
Hodakaguy
| Posted on Monday, February 05, 2007 - 09:56 pm: |
|
My S1 has Duel PM "Race Rotors" on the front along with Duel 6 piston PM calipers. Not sure if they still make that kit or not, you might want to check with them. Hodakaguy |
Firemanjim
| Posted on Tuesday, February 06, 2007 - 03:04 am: |
|
They don't. There was a limited amount of those "kits" sold back in the day, but I checked some time ago with PM and there was no mirror image calipers available for the left side. IIRC the Brembo kits use adapter plates. I have one of the old kits and also have a set of six piston ISR calipers and discs on my S-2. Again,I think it was a kit offered by ISR( out of Europe)for tubers way back in the day. Your best bet is to have one of our resident machinists make some adapters to put on a pair of 6 piston Tokico calipers from a Hayabusa/GSRX/TL/ZX as they are readily available and work well. |
89rs1200
| Posted on Tuesday, February 06, 2007 - 12:12 pm: |
|
BRAKE KITS - brembo. http://www.americansportbike.com/ has them and I have bought from them. I have never ordered from these guys, but... http://www.steelthundercc.com/buell_parts.html |
|