Author |
Message |
Norcalbuell
| Posted on Sunday, February 04, 2007 - 03:55 pm: |
|
The Bike has been running like crap and finnaly set off a couple of error codes. See post regarding symptoms Http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=3842&post=749298#POST749298 Code 11 is TPS problem and code 53 is bad ECM. Has anyone experienced these codes and is my ECM fried? Can I put my stock ecm back in until i get new race ecm? Please chime in... Thanks in advance Chuck |
Sparky
| Posted on Monday, February 05, 2007 - 01:32 am: |
|
I would pull the ECM out and inspect and clean its and the wire harness contacts with electrical contact cleaner like the stuff from Radio Shack as a first course of troubleshooting if mine had that problem. It could be a bent pin causing this kind of malfunction. Do you know the history of the ECM? |
Norcalbuell
| Posted on Monday, February 05, 2007 - 01:35 am: |
|
I bought it brand new at local dealer.. i will try that. is it hard to get to? thanks (Message edited by norcalbuell on February 05, 2007) |
|