Author |
Message |
Hogs
| Posted on Thursday, December 14, 2006 - 12:56 pm: |
|
Well guys, Just got the software loaded on a laptop and I can`t seem to get connected to the bike. When I go into the Communications tab up above the only thing there I can do is hit on the port tab.. I can go over and hit on the ECM tab to connect but it comes back with the warning ,, Check cables ports and so on... Not sure what port I should be on and even how to check that etc.. anyone here give a helping hand? Thanks |
Hogs
| Posted on Thursday, December 14, 2006 - 01:24 pm: |
|
BTW this is an older laptop running windows 98 so I am using the cables that came with the software not usb ... Does the bike have to be running to read the ecm? |
Hogs
| Posted on Thursday, December 14, 2006 - 01:26 pm: |
|
OR... How can I check what port/s the laptop and ecm need? I`m at a loss , Not a computer NErd by any means ... |
Sjh
| Posted on Thursday, December 14, 2006 - 01:38 pm: |
|
It has been awhile for me, but I am pretty sure the ignition has to be on to connect, but does not have to be running. |
Hogs
| Posted on Thursday, December 14, 2006 - 01:40 pm: |
|
Yup got it on and the switch in the RUN position still no connect... |
Hogs
| Posted on Thursday, December 14, 2006 - 01:44 pm: |
|
MAybe IF someone can chime in here and let me know how to check the ports/communications etc that might be the first place to start, But like I said I`m no computer whiz.. |
Phantom5oh
| Posted on Thursday, December 14, 2006 - 01:44 pm: |
|
First things first, get the software updates from http://www.technoresearch.com/ If it still won't connect, contact technoresearch @ 248-658-1800. They will help/talk you through it. |
Hogs
| Posted on Thursday, December 14, 2006 - 01:46 pm: |
|
I`m way up here North and Don`t really want to spend a few $$$ on calling , back and forth to the shop and bike / phone man enough guys got this and someone I`m sure will chime in here Software should be up to date no plms. there |
Hogs
| Posted on Thursday, December 14, 2006 - 02:00 pm: |
|
So I did this: 2. If Microsoft Windows 95,98, ME Operating Systems are in use, use the following steps: ->Start Menu -> Settings -> Control Panel -> System -> Device Manager Tab -> Ports (COM & LPT) *Note Communications Port number that is present or in use done this and my ports ( com & LPT ) say Communications port say ( com5 ) what does this or tell me to do? |
Hogs
| Posted on Thursday, December 14, 2006 - 02:03 pm: |
|
Should I change this port on my laptop or change it on the software when it tries to hook up I think the software says port 1 But I`m lost what to do here on in... Don`t want to change the laptop but this is the only thing that I will use this laptop for though is to hook up to the bike nothing else I use it for... |
Hogs
| Posted on Thursday, December 14, 2006 - 02:08 pm: |
|
1. Insert the CD-ROM into the CD-ROM/DVD drive of your computer. 2. Form the desktop, double click on My Computer. 3. Double-click on CD-ROM dive containing disk VDSTS. 4. Double-click on the Directory desired. 5. Double-click on Setup.exe file and follow each step for installation. 6. Run program Vehicle Diagnostic Scan Tool Software Standard. 7. Choose the communication serial port number to be used. If the computer does not have a serial port, a high speed USB to Serial Port Adapter (Keyspan USA-19HS) is needed. 8. Connect one end of the vehicle interface cable to the serial port or USB to serial adapter of your computer and the other end to the motorbike data link connector (cables with clamps connect to motorbike battery). 9. Turn Ignition On. 10. On the Tool Bar click on “ECU/ECM selection”. 11. Select one of the modes from the tool bar (Ex. Gages, Strip Chart,..) 12. On the Tool Bar go to Communication and select connect. Hmmm done this as well...Damn |
Hogs
| Posted on Thursday, December 14, 2006 - 02:09 pm: |
|
Time to get the DAMN AXE out on this laptop...! |
Hogs
| Posted on Thursday, December 14, 2006 - 02:27 pm: |
|
Just checked my Cd and it says Version 7.10.12.0 and the new download says Version 2.81-p could this be a plm. IF not OUT comes the AXE.. My only plm. I can`t download the new software on this laptop Noway to connect to internet and the CD unit don`t work...SO what do I do...GET the AXE out??? I thought it should at least hookup with the Cd that the pkg. came with??? |
Brineusaf
| Posted on Thursday, December 14, 2006 - 02:33 pm: |
|
Is it a race ECM? I bought mine from another user on here, and it wouldn't connect to a Race ECM, but would connect to the stock unit. I sent it back and had it "flashed" to fix it, still haven't tried it yet. It's been to long, I cannot offer anything useful- Sorry. Anyways, there was a batch of cables that went out that wouldn't communicate with the Race ECM. |
Hogs
| Posted on Thursday, December 14, 2006 - 02:38 pm: |
|
YEs its a race ecm ...Don`t tell me that SHIT |
Hogs
| Posted on Thursday, December 14, 2006 - 02:40 pm: |
|
I really don`t know why being a race ecm or the stock ecm wd. make a difference anyone else know more about that? Or about this BAd cable deal? Thanks for that info BTW... I hope I din`t spend more $$$ on crap, that TFI was enough to throw away.. |
Hogs
| Posted on Thursday, December 14, 2006 - 02:41 pm: |
|
DAMN AXE is looking better all the TIME!! |
Hogs
| Posted on Thursday, December 14, 2006 - 02:58 pm: |
|
Still...If someone can chime in here about how to check them damn ports etc I`ll check that first the software seems to say com 1 and the laptop seems to say com 5 communictions port but don`t know what this is all about all Spanish too me... |
Freezerburn
| Posted on Thursday, December 14, 2006 - 03:18 pm: |
|
Hogs 15 Rest of us 3 Can someone help the guy out? My computer skills don't go beyond what I can do here. Oh, I can word process too. I learned how toitalicize the other day. |
Hogs
| Posted on Thursday, December 14, 2006 - 03:24 pm: |
|
Freezerburn, LoL Thanks Buddy I think you are in the same boat as me.... Need help on this port Garbage and stuff???? I will try that first before I Lose it... Anyone???Although I am almost there now! Losing it that is... |
Sjh
| Posted on Thursday, December 14, 2006 - 03:33 pm: |
|
Give people some time, I'm sure someone will respond with at better understanding your problem. Try Al at American Sport Bike, he is very knowledgable with this software. |
Hogs
| Posted on Thursday, December 14, 2006 - 03:39 pm: |
|
I`ll hang tight now and WAIT LoL |
Teeps
| Posted on Thursday, December 14, 2006 - 05:02 pm: |
|
The com port number for the computer and the program should match. If the device manager says the 9P serial port is configured to com5. The VDSTS program, should also be set to com5. Ig switch must be on and the engine stop switch should be on. |
Hogs
| Posted on Thursday, December 14, 2006 - 05:05 pm: |
|
Thanks Teep s, Not sure about this 9p though whats 9p never seen a 9p anywheres? |
Tbowdre
| Posted on Thursday, December 14, 2006 - 05:07 pm: |
|
hogs- call Al at american sport bike. |
Hogs
| Posted on Thursday, December 14, 2006 - 05:09 pm: |
|
Tbowdre, Thanks ,But I don`t want to bother him as I never got the pkg. from him and hes got enough on his plate to try to figure this out for me, Now how many guys on this site have this software , I`m sure someone can walk me through it Thanks just the same... |
Josh_cox
| Posted on Thursday, December 14, 2006 - 05:34 pm: |
|
9p is nine pin. It's just a description of the serial port interface you are using. There is also a 15 pin serial port, thus the reason for stating which one it is. The com # for your port will be listed under the device manager. In windows, goto the control panel, open system, click the hardware tab, open device manager, click Ports (COM and LTP) and view which port it is set to. Most likely, it will be COM1. |
Hogs
| Posted on Thursday, December 14, 2006 - 05:36 pm: |
|
My laptop under Device Manger and then ports says this: Communications Port ( Com 5 ) Printer Port ( LPT 1 ) Virtual Infrared COM PORT Virtual Infrared LPT PORT and thats it nothing else??? |
Josh_cox
| Posted on Thursday, December 14, 2006 - 05:47 pm: |
|
Then you need to set vdsts to com 5 when it is looking for the bike. If it still doesn't work, attempt it on a different PC. If it's still a no go, I'd ask your vendor for a replacement. |
Hogs
| Posted on Thursday, December 14, 2006 - 05:50 pm: |
|
Well I`ll give that a try but I think I allready tried all ports on the software before Vendor is not an option... |