Author |
Message |
Cringblast
| Posted on Sunday, December 03, 2006 - 09:49 pm: |
|
2 times after getten gas CEL came on. Waited a few to restart then no prb with CEL. You all think that the fumes from the fill up are saturating the O2 sensor on the intake ?????? |
Sparky
| Posted on Monday, December 04, 2006 - 11:13 am: |
|
Most likely you are slightly overfilling the tank. The level for a full tank is at the opening that you can see if you look down past the filler opening. The air space there is for the tank vent and to allow for fuel expansion upon fillup. Best practice would be to just fill to the bottom opening. |
Cringblast
| Posted on Tuesday, December 05, 2006 - 11:47 am: |
|
Have been trying to fill at the bottom of the opening. Will try not to add anymore. Will do the fill up a little lower. Thanks. |
Justin_case
| Posted on Wednesday, December 06, 2006 - 08:31 am: |
|
02 sensor is in the exhaust system,not intake. You need to check for historic codes. Find someone with VDSTS. |
Cringblast
| Posted on Thursday, December 07, 2006 - 12:36 am: |
|
Gonna take it 1000 mile maintenance next week,I was planning to ask them to check the historic codes. Hope we can find what it was. Am interested to find out. |
Cringblast
| Posted on Sunday, December 10, 2006 - 09:40 pm: |
|
Put miles on today and stopped for 3 min. Turned xb off then started and CEL was on. Gonna check history tomorrow see what the @#%% is goen on. other than that xb12r greeeaaatt!!! |
Cringblast
| Posted on Thursday, December 14, 2006 - 08:06 am: |
|
Error 21. Active exhaust valve. Dont know why triggered CEL. Cleared code memory. See what happens. |