G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Whitexb9r Posted on Sunday, November 05, 2006 - 08:30 am:        I have an 03 firebolt 9r and I see its leaking brake fluid from the rear brake switch at the top where the wires go in....Do I have to buy a new rear master cylinder setup or is there an easier fix....I went to my local buell dealer but the buell go was off and the HD guys was lost!!!! I just would like to have a rear brake just in case....(Ive been riding for about 3 weeks with out it)   Ricochet Posted on Sunday, November 05, 2006 - 12:55 pm:        Dustin, Just buy a new switch and the two copper crush washers to seal it. If you can't get help locally, try DaveS. Go to topics, sponsors, Appleton, Dave I need it now thread. I think he works Tues to Sat. Good luck. Steve   Whitexb9r Posted on Sunday, November 05, 2006 - 07:10 pm:        Thanks I knew it didnt sound right to have to get a entire new rear system

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: