Author |
Message |
Duckbuell
| Posted on Tuesday, October 24, 2006 - 08:38 pm: |
|
Howdy again! I am removing my S3 wheels to have Pirelli Diablo Stradas mounted. How do you deal with the belt when removing the rear wheel? Do you slacken the axle adjusters, push wheel forward and slip the belt off? On re-install put the adjusters back to their original position and make sure belt is not too tight? Thank you for any tips! Pics of us on the way to the Harvest Classic and a very cool Chief Bobber
|
Shooter
| Posted on Wednesday, October 25, 2006 - 08:46 am: |
|
just pull the axle, no need to loosen the adjusters.Be careful and don't twist the belt |
Bigdaddy
| Posted on Wednesday, October 25, 2006 - 09:00 am: |
|
A slight forward push on the wheel will allow you to move the belt out of the way. Very easy process and I've found that 1 inch of ground clearance makes reversing the process mucho easier. Take your time and you'll see that it's not a problem. G2 |
Duckbuell
| Posted on Wednesday, October 25, 2006 - 05:21 pm: |
|
Thank you Shooter and Bigdaddy, It sounds pretty straight forward. Shooter, I grew up in Seattle, and rode many wet miles there! I miss the beauty of the North West. Cheers, Patrice |
|