| Author | Message | ||
     Liveyman |
What needs to be done to get rid of the stock front fairing . I would like to keep the original headlight and turn signals , but it looks like everything is attached to the same bracket . I don't want to have to do a lot of modification if I don't have to . I have seen a couple of bikes without the front fairing on this forum . Any info on how it is done would be appreciated . Thanks . | ||
| Ezblast |
Well the hard way is buy custom bracketry, will fit - so no true biggie - however, most folks just cut off the top bracket support at the main bracket, sand smooth and hit with flat black rustoleum paint and your done. If you do a nice enough cut, sand, and paint job - anyone can - then it looks stock. GT - JBOTDS! EZ  | ||
| Mabueller |
Is there a link someone can post for a maker of the Cafe Racer style fairings I see in pic's here? Thanks. | ||
| Naustin |
Go to JC Witney and do a simple search for universal motorcycle fairing. | ||
| Mabueller |
Thank you Naustin. | ||
| Woody1911a1 |
HEY naustin , or anyone thats bought/used the jcwhitney ones , i'm seeing 2 that look like they fit the bill . one's only 59 and mounts to the headlite , the other is a maier and mounts to the bars . any opinions on either ? | ||
| Mabueller |
I bought both and with the standard bars the $59 unit didn't fit. The Maier unit needed some shaping but I used the wind deflector mounts to attach it. YMMV   | ||
| Woody1911a1 |
ahhh k , just checked the specs and did some tape measuring , can see why . too bad , i liked the looks of it . many thanx , you just saved me $60  |
