Author |
Message |
Chasespeed
| Posted on Tuesday, October 17, 2006 - 11:25 am: |
|
Okay, I am wondering if the S3 uses the same bolt pattern on the bar clamp, as the other tubers. I am sick of looking at the 2 mounting holes, and the mounting surface where the stock dash was originally located. I am basically looking for a smooth top bar clamp, I can make one if needed, BUT, if I can procure one, with a few bucks, and only have to polish it up, even better... Chase |
Djkaplan
| Posted on Tuesday, October 17, 2006 - 01:05 pm: |
|
The e-bay billet guy makes a bar clamp for tubers. I'm sure he could make one to spec without the mounting surface for cheap if you can't find what you need off the shelf. He's not a sponsor, so no link, but use the key words 'billet' and 'Buell' in the e-bay search function. |
Spiderman
| Posted on Tuesday, October 17, 2006 - 02:48 pm: |
|
Chase, Yes the S3 is the same and if you are replacing it I need a barclamp if you are looking to unload it... |
Chasespeed
| Posted on Wednesday, October 18, 2006 - 08:58 am: |
|
Spidy, no prob. As soon as I find one, its yours, it has already been polished though...but, a quick trip to the blast cabinet.... BTW, we can speak of this more offline, BUT, I can re-polish, powder-coat, or, what ever you need before shipping it to you... Just let me find a So 3 top clamp.. DJ, thanks, BUT, if it came down to it, I have enough billet here, to make another bike... I was just wanting to use the facotry stuff, the top triple is already polished, and would rather mate cast- to cast, rather than cast top billet.... but , thanks for the heads up... Chase |
|