Author |
Message |
Josh_cox
| Posted on Friday, October 06, 2006 - 12:44 am: |
|
There have been many people asking about pricing of XBRR parts, or parts books. Buell sent the RR parts book on CDROM to all RR owners. I'm not sure as to whether this is a free to distribute parts book, or something that is meant to be purchased like the normal ones. For that reason, I will not post it online. If you want to see pics of a specific part, I will take photos of that part on our bike and email/post it. This is the list of RR specific parts. If you are ordering, however, be sure to ask what parts are needed for these parts to work. The RR uses several stock fasteners and parts that you need for most of these parts to work. You can reach me through email at jcox@cycleconnectionh-d.com or by PM. And to answer all of the price questions: PART # DESCRIPTION RETAIL 19593-07 ENGINE ASSEMBLY, COMPLETE 18000 670 DOWEL PIN, trigger wheel alignment (2) $0.50 ea 1092 FASTENER, oil pump (3) $0.60 ea 2274 SCREW, rocker arm shaft (4) $0.75 ea 4544 SCREW, stator (3) $0.50 ea 4589 BOLT, sprocket shaft 1.25 6478 WASHER, engine sprocket shaft 1.5 6481 SHIM, bottle gear 21 8077 NUT, chain adjuster 1 8891 BEARING RACE, right crankcase 107 9237 RETAINING RING, right main bearing 6.25 9816 TIMESERT, chain adjuster shoe 2.5 9817 CLIP, stator wire 10.5 10600 FITTING, crankcase to oil cooler 1.25 11587 O-RING, pushrod tube (8) $0.50 ea 11589 GROMMET, stator wire 0.5 16400-06 HEAD ASSY., front machined - w/ valve guides & seats 1800 16401-06 HEAD ASSY., front - complete 2379 16404-06 HEAD ASSY., rear machined - w/ valve guides & seats 1800 16405-06 HEAD ASSY., rear - complete 2379 16408-06 FITTING, drain, cylinder head to crankcase (2) $2.25 ea 16408-06 FITTING, oil drain 2.25 16409-06 DRAIN LINE ASSY., OIL, front cylinder 63.5 16410-06 DRAIN LINE ASSY., OIL, rear cylinder 65.5 16412-06 GASKET, cylinder head (2) $14.00 ea 16413-06 CYLINDER, complete (2) $576.50 ea 16415-06 O-RING, cylinder spigot (2) $1.50 ea 16418-06 STUD, cylinder base (8) $20.25 ea 16419-06 WASHER, cylinder stud (8) $3.75 ea 16420-06 NUT, cylinder stud (8) $2.50 ea 17301-06 ROCKER ARM, front intake 176.75 17305-06 ROCKER ARM, front exhaust 176.75 17308-06 ROCKER ARM, rear intake 176.75 17311-06 ROCKER ARM, rear exhaust 176.75 17314-06 SHAFT, rocker arm (4) $16.25 ea 17316-06 ROCKER COVER, front top 151.75 17319-06 ROCKER COVER, rear top 151.75 17321-06 SEAL, rocker cover – outer (2) $3.75 ea 17322-06 SEAL, rocker cover – inner (2) $2.75 ea 17615-06 GASKET, tappet cover (2) $3.75 ea 17668-06 BUSHING, rocker tower (4) $26.00 ea 17902-06 PUSHROD, intake (2) $189.5 ea 17903-06 PUSHROD, exhaust (2) $189.50 ea 17919-06 COVER, pushrod tube (4) $17.25 ea 18007-06 VALVE, intake (2) $125.00 ea 18008-06 VALVE, exhaust (2) $125.00 ea 18009-06 SEAT, intake valve (2) $30.50 ea 18067-06 SEAT, exhaust valve (2) $43.75 ea 18078-06 SPRING, assy., valve (4) $33.50 ea 18079-06 COLLAR, valve spring lower (4) $5.25 ea 18080-06 RETAINER, valve spring, top (4) $24.00 ea 18081-06 KEEPER, valve spring (8) $14.00 ea 18126-06 VALVE GUIDE, exhaust (2) $12.00 ea 18127-06 PLUG, intake manifold 1.25 18132-06 VALVE GUIDE, exhaust (oversized) (2) $21.00 ea 18417-06 COVER, front tappet 139.25 18419-06 COVER, rear tappet 139.25 21909-06 PISTON ASSY. – standard, w/ rings, pin & clips $354.00 ea 22267-07 OIL / PISTON JET ASSY., complete (2) $5.25 ea 23700-06 FLYWHEEL & CONNECTING ROD ASSY. 1780 24481-06 CRANKCASE SET, w/ trans door (silver) 2635 24497-06 ACCESS DOOR, transmission 339.75 24499-06 COVER, starter 7.25 25017-06 PRIMARY COVER, w/ 40574-06 700 25480-06 CAM GEAR SET, w/ pinion gear 1026.25 25481-06 PINION GEAR 183.5 25483-06 SPACER, pinion gear 50 25505-06 FITTING, cylinder head to crankcase drain (2) $8.25 ea 26421-07 OIL PUMP ASSY. 111.75 26422-07 OIL PUMP BODY 95 26423-07 PLUG ASSY. 9 26504-06 GASKET, oil pump outer cover 3.75 26505-06 COVER, oil pump 28.5 26546-07 GEROTOR ASSY., scavenge 7 26547-07 GEROTOR ASSY., lube 7 26568-07 SEPARATOR PLATE, oil pump 2 27182-06 INTAKE MANIFOLD (2) $200.00 ea 27285-06 GASKET, intake manifold (2) $3.75 ea 27288-06 INJECTOR, fuel (2) $66.25 ea 27306-06 COUPLING, fuel injector (2) $53.50 ea 29900-06 STATOR ASSY. 213.75 29901-06 ROTOR ASSY. 291.5 31607-06 SPARK PLUG (2) $5.75 ea 32454-06 TRIGGER WHEEL 75 35261-05 GEAR, 1st-mainshaft 149.75 35262-05 GEAR, 2nd-mainshaft 123.5 35263-05 MAINSHAFT 202.75 35264-05 GEAR, 4th-mainshaft 142.5 35267-05 GEAR, 1st-countershaft 149.25 35268-05 GEAR, 2nd-countershaft 162.75 35269-05 GEAR, 3rd-countershaft 140.25 35270-05 GEAR, 4th-countershaft 113.5 35271-05 COUNTERSHAFT 185.5 35273-06 5th GEAR, mainshaft assy. 190.25 36750-06 CLUTCH ASSY. 550 37935-06 CLUTCH BASKET & DAMPER ASSY. 312.5 39935-07 CHAIN GUIDE, upper 10 40013-06 PRIMARY CHAIN 34.5 40071-07 ADJUSTER ASSY., chain, w/ shoe, collar, plate & screw 22 40159-06 SPROCKET, engine 400 63807-07 OIL FILTER (BLUE ONLY) 8.5 AA0403.3CZB FASTENERS, battery box (6) $0.20 ea AA0403.3CZB FASTENER, fuse block mount (1) / ground tab (1) $0.20 ea AA0404.3CZ FASTENER, chain slider 0.45 AA0408.2CBL FASTENER, chain slider, swingarm pivot 0.45 AA0410.2CZB FASTENER, steering stop adjustable (2) $0.20 ea AA0508.2CBL FASTENER, stand spool (2) $0.75 ea AA0514.2CZB BOLT, pinch, lower (6) & upper triple clamp (2) $3.25 for (6) AA0520.2CZB BOLT, pinch, steering stem 0.75 AA0520.3CZB FASTENER, fairing support bracket to frame (upper) 1 AA0526.3CZB FASTENER, fairing support bracket to frame (lower) 2.5 AA0530.1CZB FASTENER, rear axle adjuster (2) $3.00 for (2) AA0536.2CZ FASTENER, front muffler mount (2) $2.00 ea AA0718.1CXZ FASTENER, foot peg (2) $0.75 ea AN1004.5CBL SCREW, oil line clamp bracket 0.2 AN1008.2FSS FASTENER, fork clamp, steering dampener (2) $.20 for (2) AN1010.2CZB SCREW, primary cover (2) $1.00 ea BA0512.3Z WASHER, fairing support fastener (lower) (2) $.80 ea BA0612.3Z WASHER , center tie-bar mount 0.75 BA0614.3Z WASHER, center tie-bar mount (2) $1.10 ea C0179.07AH STUDS, quarter turn (14) $3.00 ea C0181.07AH RECEPTACLES, quarter turn (14) $2.50 ea C0182.07AH RETAINERS, quarter turn (14) $0.40 ea C0183.07AH RIVETS, quarter turn, SS, 3/32 X 1/4 (4) $0.20 ea C0184.07AH CLAMP, throttle body (4) / velocity stack (4) $1.25 ea C0185.07AH RIVETS, quarter turn, SS, 3/32 X 1/8 (24) $0.15 ea C0187.07AH TAPE, frame insulation 4.75 C0190.06AH CLAMP, rear shock reservoir 1.25 C0193.06AH FITTING, jiffy tite (3) $2.50 ea C0194.06AH PIN, primary cover locating (2) $9.75 ea C0242.06AH BUMPER, tail section / bodywork (4) $5.75 ea C0243.06AH STUD, bumper, tail section / bodywork (4) $0.30 ea C0246.06AH CLAMP, front brake reservoir 2.25 C0247.06AH CLIP, front harness zip tie 0.25 C0511.T CLAMP, mounting, fuel overflow bottle 0.95 CA0031.06AH SCREW, throttle body bridge (8) $0.20 ea CB0004.T WASHER, rear axle adjuster, jam nut, copper (4) $0.30 ea CB0017.06AH WASHER, rear axle (2) $3.00 ea CD0016.06AH NUT, rear axle 7.75 DA0500.8CZ JAM NUT, rear axle adjuster(2) $.80 for (2) DA0500.8CZ NUT, fairing support fastener (upper) 0.5 E0005.05AH WHEEL BEARINGS (2) $20.50 ea G0013.06AH BLOCK, chain slider, swingarm pivot 4.75 G0110.04AH WHEEL ASSY., front, w/ E0004.02A8A, G0325.02A8 & G0313.02A8 954 G0309.05AH WHEEL ASSY., rear, w/ 3, 6 & G0313.02A8 1011 G0321.07AH AXLE, rear 82.25 G0323.05AH SPACER, center, rear 10.75 G0328.05AH SPACER, axle, caliper side 9 G0329.05AH SPACER, axle, sprocket side 13.5 G0400.07AH SPROCKET, rear (49 tooth) 45.5 G0440.06AH SPROCKET, transmission (20 tooth) 55.95 G0600.07AH SPROCKET, idler 12.5 G0603.07AH BRACKET, idler 85 G0606.07AH SPACER, idler sprocket 2.5 H0020.05AH PISTON SET 382.5 H0021.05AH PAD SPRING, caliper (set of 2) $ H0026.05AH PIN, brake pad, caliper (set of 2) $ H0027.06AH HOSE SET, rear master cylinder reservoir 7.5 H0102.07AH CALIPER & CARRIER ASSY., rear, w/ H0022.F, H0024.F, H0026.F, H0030.T, H0033.07AH, H0034.T, H0053.T, H0105.F, H0106.F & H0301.T 60 H0110.04AH CALIPER ASSY., front brake w/ H0021.05AH, H0026.05AH , H0032.02A8, H0022.F, & H0300.05AH 598 H0150.07AH BRAKE ROTOR, rear 55 H0300.05AH PADS, brake (set of 4) 179.25 H0405.05AH BANJO BOLT, master cylinder (2) $8.25 ea H0412.05AH WASHER, crush, banjo bolt (4) $0.40 ea H0421.05AH SPACER, rear caliper axle 5.25 H0422.06AH CLIP ROUTING GUIDE, rear brake line (2) $0.15 ea H0425.05AH BANJO BOLT w/ bleeder 15 H0507.07AH MASTER CYLINDER ASSY., w/ lever 91 H0508.05AH LEVER, front brake 17.75 H0522.05AH BRAKE LINE ASSY., rear, w/ H0405.05AH & H0412.05AH, H0425.05AH 58 H0523.05AH RESERVOIR w/ cap, bracket, screw, nut, washer, lock nut, hose & (2) clamps $N/A H0531.05AH BRAKE LINE ASSY., front, w/ H0405.05AH & H0412.05AH 57.5 J0105.07AH TRIPLE CLAMP ASSY., upper, w/ AA0514.2CXZB 153 J0106.07AH TRIPLE CLAMP ASSY., lower, w/ stem 331 J0121.04AH FORK, front (LH) 1175.47 J0122.04AH FORK, front (RH) 1175.47 J0135.07AH NUT, steering stem 8 J0161.05AH BRACKET, mount, steering dampener 40 J0162.05AH SPACER, frame mount bracket, steering dampener (mount bracket to steering dampener) 3.75 J0400.07AH STEERING DAMPENER 326 J0402.07AH CLAMP, fork, steering dampener 40 K0020.07AH SLIDER, chain 18 K0021.07AH STAND SPOOLS (2) $7.50 ea K0098.05AH ADJUSTER BLOCK, rear axle (2) $49.25 ea K0100.07AH SWINGARM ASSY., w/ 60328-98A, C0193.06AH, E0006.02A8, K0158.1AK, K0403.02A8 & Q0127.1AK 887 K0101.1AK BRACE, swingarm 40.15 K0410.04AH SHOCK, rear 1022 L0045.07AH INSULATION, frame 52 L0090.07AH REAR SUBFRAME & BRACKET ASSY. 476 L0100.07AH FRAME / FUEL TANK ASSY., w/ bearings 1100 L0160.05AH MOUNT, center tie-bar 117 L0501.07AH ISOLATOR ASSY., front 22 L0511.07AH "V" BRACKET ASSY. 220 L0940.07AH BRACKET, fairing support 137 L0943.06AH FAIRING SUPPORT EXTENSION (2) $11.00 ea M0046.06AH FAIRING, lower front, LH 575.5 M0059.07AH SLIDER ASSY., w/ M0136.07AH, M0135.07AH & AA0615.2CZB, (2) $33.00 ea M0134.06AH TAIL SECTION, upper 570.5 M0135.07AH LUG, slider (2) $18.00 for (2) M0136.07AH PUCK, slider (2) $15.00 (2) M0600.06AH WINDSCREEN 59.5 M0621.07AH FAIRING, front 648.75 M0745.07AH GRAPHIC, front fairing (2) $24.50 ea M0825.07AH GRAPHIC, windscreen 5.5 M0870.07AH BELLY PAN 537 M1001.07AH FAIRING, lower front, RH 414 N0002.06AH HANDLEBAR (replacement) (2) $15.75 ea N0025.06AH SEAT $N/A N0037.06AH CLIP-ON HANDLEBAR SET 165 N0158.06AH SWITCH GEAR, right 38.5 N0307.05AH CABLE, throttle control 31.25 N0308.05AH CABLE, idle control 31.25 N0320.07AH SHIFT LINK ASSY. 11 N0401.07AH BRACKET, foot peg mount right, rider 50 N0402.07AH BRACKET, foot peg mount left, rider 50 N0516.07AH TOE PEG, shift lever 2 N0599.07AH BUSHING, shift pedal 7.5 P0023.07AH BRACKET, throttle cables 43.75 P0025.06AH VELOCITY STACK, front cylinder 43.75 P0033.05AH HOSE, fuel vent, norprene 4 P0050.06AH VELOCITY STACK, rear cylinder 43.75 P0097.07AH BOTTLE, catch, fuel overflow 5.75 P0114.05AH VENT TUBE, fuel 1.5 P0130.07AH FUEL PUMP ASSY. 331 P0166.07AH REGULATOR, w/ o-rings 113 P0215.07AH AIRBOX COVER ASSY., w/ ram air duct, base & tachometer mount 781.5 P0268.05AH FUEL RAIL ASSY. 134.75 P0279.06AH THROTTLE POSITION SENSOR 34 P0304.07AH COVER, fuel pump anti-cavitation 6.25 P0330.05AH FITTING, banjo fuel line 4 P0333.05AH FITTING, 45 degree, fuel line 21.5 P0357.05AH COUPLER, throttle body (2) $9.00 ea P0464.07AH FUEL LINE ASSY. 36 P0803.07AH THROTTLE BODY ASSY. 493.75 P0814.07AH THROTTLE LINK ASSY. 15.5 P0817.05AH BOOT, throttle body base plate 108 P0818.05AH BASE PLATE, throttle body 43.5 P0821.05AH BRIDGE, throttle body (2) $7.25 ea Q0002.07AH OIL COOLER 237 Q0003.07AH CATCH BOTTLE, oil overflow 6 Q0005.05AH BREATHER HOSE, PVC, oil overflow catch bottle 0.6 Q0006.05AH CATCH BOTTLE, transmission overflow 4 Q0030.07AH OIL COOLER LINE, input 50 Q0031.07AH OIL COOLER LINE, return 52.5 Q0035.07AH VENT HOSE, transmission, silicone 16 Q0036.07AH BREATHER LINE ASSY., FRONT CYLINDER 9.5 Q0037.07AH BREATHER LINE ASSY., REAR CYLINDER 11 Q0038.05AH VENT HOSE, transmission, PVC 1.35 Q0040.05AH FITTING, breather hose (1) / transmission vent (1), straight $0.75 ea Q0041.05AH FITTING, transmission vent hose, 90 degree 0.8 Q0300.05AH CLAMP, transmission overflow bottle(2) $2.80 ea Q0301.05AH CLAMP, mounting, oil overflow bottle 2.5 Q0302.06AH BRACKET, oil line clamp 11 S0101A.06AH HEADER, front 390.75 S0101J.06AH HEADER, rear 390.75 S0105.05AH MUFFLER 365 S0135.05AH MOUNT, front muffler 47.5 S0140.05AH COLLECTOR 215 S0182.05AH DAMPENER, spring (10) $0.85 ea S0202.07AH SPRING, header (10) $4.60 ea V0099.06AH ANTI-ROTATION DEVICE, tappet (2) $38.50 ea V0111.06AH BUSHING, anti-rotation device (2) $10.95 ea Y0100.07AH BATTERY 63 Y0152.07AH ELECTRONIC CONTROL MODULE 230 Y0158.06AH BATTERY BOX 66 Y0196.06AH ISOLATOR, battery box, M/F (2) $2.25 ea Y0196.06AH ISOLATOR, ECM, M/F (2) $2.25 ea Y0196.06AH ISOLATOR, fuse block, M/F 2.25 Y0197.06AH ISOLATOR, battery box, F/F (2) $3.90 ea Y0200.07AH WIRE HARNESS, main 430 Y0203.07AH SPARK PLUG WIRE, front 6 Y0204.07AH SPARK PLUG WIRE, rear 8.25 Y0302.07AH VOLTAGE REGULATOR 114 Y0353.06AH BRACKET, fuse block mount 12.35 Y0502.06AH TACHOMETER 149 Y1002.07AH BRACKET, voltage regulator mount 16.5 Y1004.06AH O-RING, battery box 4.5 Y1005.06AH CLIP, wire harness routing (2) $0.15 ea SLIPPER CLUTCH 1250 |
Vaneo1
| Posted on Friday, October 06, 2006 - 12:49 am: |
|
wow, bet that took a lot of time |
Eboos
| Posted on Friday, October 06, 2006 - 12:50 am: |
|
Admins, can we get a sticky for this post? |
Thespive
| Posted on Friday, October 06, 2006 - 01:18 am: |
|
Go Josh, you are an animal. --Sean |
Trojan
| Posted on Friday, October 06, 2006 - 04:32 am: |
|
How interesting. The STM slipper clutch is cheaper from Buell than it is from STM (at least at the current exchange rates anyway!). |
Xbob
| Posted on Friday, October 06, 2006 - 07:00 am: |
|
thanx josh. |
Buellman39
| Posted on Friday, October 06, 2006 - 07:17 am: |
|
You are the man. Thanks |
Trojan
| Posted on Friday, October 06, 2006 - 07:20 am: |
|
Ouch, I just worked out the price of changing to a complete XBRR style body kit on the race bike |
Buelltroll
| Posted on Friday, October 06, 2006 - 07:53 am: |
|
Why you selling the racebike Matt? Got something meaner in the works? |
Trojan
| Posted on Friday, October 06, 2006 - 08:01 am: |
|
Unfortunately we were badly let down by a major sponsor at the beginning of this season, which meant that we ended up footing the entire GBP15000 bill for racing this year. We had planned to sell the bike at the end of this season to try and recoup some of that money, and to 'retire gracefully' from racing. Phil Read is very keen to ride the bike again next year though, and we know we still haven't reached it's full potential yet, so if we can get a sponsor to stump up some financial support for next year we will race again We would need a financial comitment of around GBP12000 though to make it worthwhile. It would be a shame to lose the only Buell XB racer in the UK, especially as we put so much effort into introducing and running the Thunderbike series into the country just so there was a place to race Buells competitively |
M1combat
| Posted on Friday, October 06, 2006 - 11:05 am: |
|
Don't quit Matt... where there's a will there's a way. Get another sponsor and race next year. You know you want to . |
M1combat
| Posted on Friday, October 06, 2006 - 11:07 am: |
|
Oh , and thanks Josh. |
Daves
| Posted on Friday, October 06, 2006 - 12:10 pm: |
|
Thanks Josh, I've been waiting for those from the factory. |
Dtx
| Posted on Friday, October 06, 2006 - 07:11 pm: |
|
Wow...the engine is $18,000.00!!?? |
Schmitty
| Posted on Sunday, October 08, 2006 - 11:19 am: |
|
Does anybody have a decent picture of the upper and lower triple clamps? If I remember they are billet units, so those prices seem like a relative bargain. Schmitty |
Josh_cox
| Posted on Sunday, October 08, 2006 - 01:11 pm: |
|
Sorry, I know the pic is huge :P
|
Xbob
| Posted on Sunday, October 08, 2006 - 01:22 pm: |
|
what size forks are those for? |
What_the
| Posted on Sunday, October 08, 2006 - 01:47 pm: |
|
43mm |
Xbob
| Posted on Sunday, October 08, 2006 - 02:49 pm: |
|
and an XBScg is 41mm? |
Diablobrian
| Posted on Sunday, October 08, 2006 - 03:09 pm: |
|
yep scg is 41mm |
Xbob
| Posted on Sunday, October 08, 2006 - 03:18 pm: |
|
damn. |
Spiderman
| Posted on Sunday, October 08, 2006 - 03:20 pm: |
|
Do you have pics of the oil pump and/or know what the flow rate is compared to stock. Also will it fit a stock motor or is specific for the XBRR motor? |
Chrisb
| Posted on Sunday, October 08, 2006 - 07:06 pm: |
|
Josh, Could you post some pics of the muffler? |
Schmitty
| Posted on Sunday, October 08, 2006 - 07:45 pm: |
|
Is the steering stem the same diameter? Could the upper be used with the stock lower and steering stem? Are the XBRR versions adjustable? Schmitty |
Josh_cox
| Posted on Sunday, October 08, 2006 - 10:05 pm: |
|
quote:Do you have pics of the oil pump and/or know what the flow rate is compared to stock. Also will it fit a stock motor or is specific for the XBRR motor?
The oil pump assy is completely different. I do not have flow numbers. It will not fit a stock engine. I will get pics on Tuesday.
quote:Josh, Could you post some pics of the muffler?
Pics of the muffler will be up ASAP (Tuesday) as requested!
quote:Is the steering stem the same diameter? Could the upper be used with the stock lower and steering stem? Are the XBRR versions adjustable? Schmitty
I think it uses stock head bearings. So, probably. I wouldn't know without trying though. |
Spiderman
| Posted on Monday, October 09, 2006 - 01:29 pm: |
|
Josh, No need, I was looking at motor pics of the RR and there was no was it will fit any stock Buell motor... thanks. |
Josh_cox
| Posted on Tuesday, October 17, 2006 - 04:03 pm: |
|
Sorry about not getting pics sooner. Today we finally had time to start working on the bike! The three pics show the muffler exit, muffler inlet, and the different mounting location used for the front. Sorry, it isn't a bolt on part. [img]http://www.cycleconnectionh-d.com/images/cycleconnectionh-d/rrmuffler%20001.jpg[\img] [img]http://www.cycleconnectionh-d.com/images/cycleconnectionh-d/rrmuffler%20002.jpg[\img] [img]http://www.cycleconnectionh-d.com/images/cycleconnectionh-d/rrmuffler%20003.jpg[\img] (Message edited by josh_cox on October 17, 2006) |
|