G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Xldevil Posted on Sunday, September 03, 2006 - 05:28 am:        Hey.One of them rubbers that are glued to the frame as a steering stop came loose. I tried several kind of power strips to glue it again,but nothing works for a longer time. Thank you for any advice. Bike is a Cyclone. Ralph   Aesquire Posted on Sunday, September 03, 2006 - 09:58 am:        Gorilla glue, & a wrap of electrical tape to hold while drying. Then forget to take off tape & forget problem. Worked for me.   Ceejay Posted on Sunday, September 03, 2006 - 09:59 am:        That two part glue(epoxy) has worked well for me applied as Aesquire said...   Jackbequick Posted on Sunday, September 03, 2006 - 01:43 pm:        Weldwood Contact Cement Put a thin coating on both mating surfaces, allow that to dry until you can touch it and it won't stick to your finger, align the two parts and bring them into contact. It will help if you can wrap the bumper with a bungee cord, surgical tubing, or an elastic strip overnight. Jack   Djkaplan Posted on Sunday, September 03, 2006 - 10:05 pm:        The key seems to be wrapping it overnight. I used the superglue that comes in the replacement kit from Buell and wrapped taped over it while it was curing. That was over 5 years ago an they're still holding tight.   Cyclonemick Posted on Monday, September 04, 2006 - 08:07 am:        I also used super glue and electrical tape until it cured. Still holding after 15k

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: