G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Xbimmer Posted on Monday, August 14, 2006 - 01:20 am:        Been running Syn3 since my 1k service now and again at my 5k, seems to do well especially in these last couple months this summer. Picked up a case of M1 V-Twin today from Auto Zone, only one they had. Worked out to $8 per quart which is what I think HD is charging me for the Syn3. I don't want to start an oil war thread here but these bottles are marked as suitable for all three cases in our bikes, engine, trans, and wet clutch case. Same as Syn3. It would be great if Syn3 specs and base compounds were known, but if the M1 is good for all cases in my bike then I don't feel there is any other choice.   Mb182 Posted on Monday, August 14, 2006 - 08:54 am:        Amsoil shows their 20-50 as recommended for all three places.. MB   Brucelee Posted on Monday, August 14, 2006 - 11:34 am:        Ditch the Syn3. The other two oils are great, as is Red Line.   Thunderbox Posted on Tuesday, August 15, 2006 - 12:59 pm:        06 Buells have a different transmission I don't know if an engine oil is a good thing for the trany or not. I found a whine in the tranny when the put Syn3 in and it went away when I used the specified Formula+ oil. Just an observation.   Mb182 Posted on Tuesday, August 15, 2006 - 02:49 pm:        I too am kind of leary about dropping the viscosity in the tranny.. Amsoil does make a Syn gear oil.. I am leaning toward that for the tranny MB

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: