G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dick Posted on Wednesday, July 12, 2006 - 02:37 am:        Looking to put the shorter 12S lower standard seat on my 06 XB12Ss long Lightning to get a lower seat hight nothing available for my bike in aftermarket yet   Tommy_k Posted on Wednesday, July 12, 2006 - 08:27 pm:        Hey Dick, Been there, done that. Your going to need more than just the rails. both subframes plastic undertray seat a lot of patience. You'll have to narrow the subframes, ream out the mounting holes. notch out the undertray for shock/spring clearance. notch out the undertray to lay the Ss shock res. ditch the batt. tray. cram all the long azz wires in there. Just a heads up. Can be done, but not a simple swap. See my profile for a picture. Hope that helps... TK   Brineusaf Posted on Monday, July 17, 2006 - 01:20 am:        tom, you got a pic of the bike from the rear, i was considering mounting my lic plate like that but was worried about the added width.   Cochise Posted on Monday, July 17, 2006 - 07:09 am:        Yo Tommy, do you have the original Ss Subframe? I need one!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: