G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Wdbdel Posted on Sunday, July 16, 2006 - 07:26 pm:        I looked at a wrecked XB12R to determine the cost to fix. When the key was turned, the odometer worked. The starter wouldn't activate, but I'm assuming the missing relays on the left side had something to do with that. I didn't have the presence of mind to make sure that the ECM was still on the bike, and since then have worried that it may be gone also. My question is...Will the odometer information work if the ECM is removed?   Diablobrian Posted on Sunday, July 16, 2006 - 07:33 pm:        Yes. The odometer is not affected by changing ECMs so it is independent from the ECM.   Wdbdel Posted on Sunday, July 16, 2006 - 09:06 pm:        Thanks! I'm sure there is a photo somewhere, showing the location of the ECM on a XB12R, but I haven't been able to find one. Can someone direct me to a picture of an installed ECM...or is it too buried to take a picture while it is installed?   Diablobrian Posted on Sunday, July 16, 2006 - 09:37 pm:        It's on the other side of the support that holds the gages   Firebolteric_ma Posted on Sunday, July 16, 2006 - 09:38 pm:        it is located behind the fairing. near the lights

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: