Author |
Message |
Cpres
| Posted on Sunday, July 09, 2006 - 09:23 pm: |
|
While doing repairs to my m2 I found the vent hose from the cam chest to the oil bag pinched closed and cracked. I believe this has been the cause of my increased oil blowby and consumption that I have been fighting since the stealer replace the stater mounting gasket. I also found the wiring harness pinched in their also. |
Sanchez
| Posted on Sunday, July 09, 2006 - 11:42 pm: |
|
Looks like I'm due for a new starter gasket as well.
It's a gigantic PITA, but it could be a lot worse. At least it's not the gearcase cover gasket again. |
Cpres
| Posted on Monday, July 10, 2006 - 03:13 am: |
|
Make sure to get metal cored gasket for primary cover. My problems were caused by the Stealer (dealer) who touched my bike. I do all my own now |
|