| Author | Message | ||
     Ulybagger |
Could someone tell me where to find the info on the jumper to run both lights on Highbeam? I searched and can't seem to find it. Or you could just tell me how to do it? | ||
| Windrider |
Ulybagger, From another post: "Sure, the easy one was the lights. After opening the switch you will notice three wires coming from the high/low button, you will need to add a jumper between the blue and the yellow wires. I used a standard blue scotch-lock connector with the ends trimmed off so it would fit in the switch housing, and placed a sealant in the scotch-lock to prevent corrosion. Afterwards everything will work normally except you will now have both lights on when in the high beam position." I think that you could also find these wires down under the "number plate" windscreen where it would be better to modify them. Happy Trails, WindRider | ||
| Ulybagger |
sounds easy enough. thanks for the info. |
