Author |
Message |
Chelgeorge
| Posted on Monday, June 19, 2006 - 04:39 pm: |
|
I'm having a hard time finding anywhere to buy aftermarket turn signals for my 02 blast!. I know that they're not so popular, but there's gotta be something out there. or am i stuck with the stock signals? the only ones i found so far were not even DOT approved b/c they're too small to be safe. Any suggestions? |
Bomber
| Posted on Tuesday, June 20, 2006 - 10:58 am: |
|
lots of choices from the usual suspects (sponsors, Dennis Kirk, et al) if you don't look for something specifically listed for your P3, you'll be fine -- just about any aftermarket turn signal can fit, though the connectors may be different sizes non-DOT doesn't mean non-safe, btw, just means they don't meet the requirements (not enough reflectivity, too small for regs) -- regualtions and safety are not equal, IMO |
Mikej
| Posted on Tuesday, June 20, 2006 - 11:17 am: |
|
You might also consider the Buell X1 turn signals. I put them on my M2, took a little massaging with a rattail file for the front ones though to get them to fit right. The X1 turn signals have the bendy/flexible posts/stalks/shafts so if you accidently bump into something they don't snap right off. Might be an option to consider. |
Matty
| Posted on Tuesday, June 20, 2006 - 04:23 pm: |
|
The blast comes with the X1 signal stock. Have you looked at Lockhart-Phillips? Tons of choices in there. (Message edited by matty on June 20, 2006) |
Mikej
| Posted on Tuesday, June 20, 2006 - 04:27 pm: |
|
Oops, okay, never mind then. |
|