| Author |
Message |
    
R_grant
| | Posted on Tuesday, June 20, 2006 - 12:45 am: | 
|
first off.. i didnt get a service manuel yet, and it didnt come with the bike..
when it got here the clutch had too much play in it, so i tightened it and went riding. after an hour it was loose again, and not wanting to get into neutral all of the time. i backed it up more nearly to the end of its adjustment now. and im getting the engine or fuel injection (not sure which red light that is) when i pull the clutch in and the engine is off.
would you think thats the whole clutch having been fried, or maybe just a warn cable?
bike has 5k miles on it, and im not a first time rider or anything burning out the clutch.. any advice? |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through February 28, 2007 »
03 XB9A clutch and general question