G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Brucelee Posted on Monday, May 15, 2006 - 01:31 pm:        Hi Guys, I am wondering if any of you have done this. If so, would appreciate your posting pix and comments on how you accomplished this. I think it would look great but am just guessing at this point. Thanks   Lonexb Posted on Monday, May 15, 2006 - 05:37 pm:        Richard try to get in touch with Miasto. i believe he did his. brian   Brucelee Posted on Monday, May 15, 2006 - 08:13 pm:        Thanks for the idea, Brian!   Cmm213 Posted on Monday, May 15, 2006 - 08:51 pm:        Hey bruce they can be polished- it will take you some time but can look very good. I dont have pics because I dont want to do it. But the best way to get the black coating off is a angle die grinder with a abrasive cleaning disk, they are small and look like a circle scotch pad. After you get all the black coat off use a DA sander and start sanding go all the way up to 1500 wet sand 2000 and buff with a buffing rouge I always used the white in the past. Then mothers it and it should look like a mirror. But everyone has different ways to polish aluminum- my two cents, good luck

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: