Author |
Message |
Goozyman
| Posted on Thursday, May 11, 2006 - 07:13 am: |
|
anyone find the trick to have both headlights on on a XB12S without radical wiring changes? |
Xb12s_streetdemon
| Posted on Thursday, May 11, 2006 - 07:34 am: |
|
see other thread |
Goozyman
| Posted on Thursday, May 11, 2006 - 08:00 am: |
|
i searched the KB, no threads. If you were a little more helpful and less troll, it would be awesome. |
Jimduncan69
| Posted on Thursday, May 11, 2006 - 08:30 am: |
|
there is a sweet spot on your light switch on your handle bars. you can switch it in the middle of high beams and low beams and both lights will be on. thats the way i run mine works just fine. |
Mdm
| Posted on Thursday, May 11, 2006 - 08:32 am: |
|
Current Thread in XBoard http://www.badweatherbikers.com/buell/messages/32777/196130.html?1147311763 |
Goozyman
| Posted on Thursday, May 11, 2006 - 08:59 am: |
|
thanks guys. |
Perry
| Posted on Thursday, May 11, 2006 - 03:41 pm: |
|
I used a clip thing from Radio shack that you simply clip over the two wires behind the flyscreen and it makes a connection between them. You can remove the clip later if you want. Works perfectly, and took me 2 minutes to install. Perhaps that is what someone called a "scotch loc" |
Goozyman
| Posted on Thursday, May 11, 2006 - 04:08 pm: |
|
i just tried the half on/ half off trick, works perfect. |
Duff24
| Posted on Thursday, May 11, 2006 - 07:31 pm: |
|
yeah i've been runnin both headlights on for a year or so. Don't think i'm going to anymore cause my headlights ground wire melted inside the wire harness, causing them to quit working altogether...not for sure if that caused this to happen but i'm playin it safe... |
|