Author |
Message |
Indy_bueller
| Posted on Sunday, April 30, 2006 - 03:59 pm: |
|
Ok, someone please lay this out in laymans terms for me. I have a 2003 XB9R. I want to upgrade to the new bulletproof 2006 belt. I purchased the parts from my sponsoring dealer. This is what I have: 30T front sprocket (40343-02) Diamond highlight rear sprocket (40020-03Y) 2006 belt (Dont have p/n) 2004-up polished guards Chrome rear sprocket bolts Do I have the right parts? Do I need anything else? |
Indyblast
| Posted on Sunday, April 30, 2006 - 04:34 pm: |
|
indy you might check a few of the high performance XB specialist sites. I know I was reading last night about the '06 belt upgrade and they had the conversion and everything. I'll see if I can't find it again. |
Diablobrian
| Posted on Sunday, April 30, 2006 - 04:56 pm: |
|
You still need the idler pulley and bracket that matches the new belt. |
Indy_bueller
| Posted on Sunday, April 30, 2006 - 05:13 pm: |
|
What bracket is that exactly? The big thing I'm worried about is the front sprocket. I think they got me the wrong one. |
Al_lighton
| Posted on Monday, May 01, 2006 - 09:43 am: |
|
Pete, That is the wrong front sprocket. The right one for the new belt is a 27 tooth sprocket. The tooth pitch is 11mm on the old front sprocket, but is 14mm on the new front sprocket. And you do need the idler. I have the part numbers at work, but I'm typing this from home, so I can't give them to you. But your dealership just needs to look at the parts schematic for any 04 or later. Al |
03worc9r
| Posted on Saturday, July 26, 2008 - 09:02 am: |
|
http://www.badweatherbikers.com/buell/messages/384 2/364492.html I just did mine a couple weeks ago and this was very helpful. only thing I didn't do is change out the master cylinder. Goodluck. |
|