G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Isham Posted on Monday, March 13, 2006 - 07:59 pm:        What tool do you need to remove the axle? FSM says you turn it ccw 15 times or so to loosen it.   Skyguy Posted on Monday, March 13, 2006 - 08:21 pm:        If there is not a tool in the bad under the seat you can always do what I did. Go to Ace hardware and find a bolt/nut that fits. I spent about $2.00 and used a bolt and three nuts. The stock tool is only eight dollars but as usual my local glamor-bike/t-shirt dealer was going to take ten days to get one in stock.   Diablobrian Posted on Tuesday, March 14, 2006 - 10:43 am:        the other trick is finding an appropriate spark plug socket (with a 7/8 hex on the end of it) and putting it on an extension backwards.   Ewulls01 Posted on Tuesday, March 14, 2006 - 11:46 am:        does anyone know the size of the tension hex that is on the bottom of the swing arm? I'm going to measure and guess but I would rather know before I go and buy another tool. Thanks, Erik

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: