G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Eboos Posted on Wednesday, March 08, 2006 - 07:21 am:        I installed a Cycle Electric voltage regulator which should be a correct replacement for my 2000 M2, but when I swapped them out, I noticed a wire bolted to the back side of the stock regulator. It seemed to just go to the case of the regulator, and there wasn't a spot to bolt it on the new one. I figured that it was some type of ground, so I just bolted it to the bottom mounting bolt on the regulator. Is this correct?   Blackbelt Posted on Wednesday, March 08, 2006 - 01:31 pm:        That should be good.. like the Accell one i have i had to grind down so the bolt could tuck in behind the regulator, but works good now.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: