Author |
Message |
1stbuell
| Posted on Tuesday, March 07, 2006 - 10:14 pm: |
|
'05 XB12R 2000 miles on it. I just noticed that my brake light is not coming on when I apply the front brake only (rear works fine). I checked what I could and everything seems to be fine. Brakes and suspension are stock. Any suggestions? |
Stretchman
| Posted on Thursday, April 20, 2006 - 10:43 am: |
|
Same problem. Just discovered today, and it was in service yesterday, and still under warranty. SO I am a little perplexed. Someone said that they simply unplug, and maybe the plug isn't making contact. Stretch |
Prismman
| Posted on Saturday, April 22, 2006 - 08:31 am: |
|
I had something similar happen after a tune up. The service tech tightened the screw that holds the switch in place. This screw needs to be backed out about 1 1/2 turns to allow the switch to travel open and and closed. Once I got the screw backed out the switch worked properly. |
|