G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   3boyz Posted on Sunday, March 05, 2006 - 10:46 pm:        Just freshened up with Baisley 1.84 and 1.615 valves and bronze guides. These heads made 106hp on my 74" Buell and 125hp when I went to 88". The heads are relieved .025 for a 3-13/16 bore but could be resurfaced at no charge so they could be used on a smaller motor. These are Nallin hand ported not CNC'd. $850.00 complete. Rob 563-564-0079   Stricnine Posted on Monday, March 06, 2006 - 11:30 am:        Are these setup for use with Thunderstorm pistons and what stage porting is done.   Stricnine Posted on Monday, March 06, 2006 - 11:48 am:        One more thing. What lift springs are in these and you said it could be resurfaced to use with smaller motors for free. Who would do it and I would want them for a 1203 or 1250 at biggest. Would there be any probs with that.   Stricnine Posted on Monday, March 06, 2006 - 11:51 am:        !!!!!!!!!!!!! (Message edited by stricnine on March 06, 2006)   Stricnine Posted on Monday, March 06, 2006 - 11:51 am:        !!!!!!!!!!! kstalvey@triad.rr.com (Message edited by stricnine on March 06, 2006)   Stricnine Posted on Monday, March 06, 2006 - 11:53 am:        Sorry for all the posts. It wasn't showing up and I kept redoing it.   Blake Posted on Monday, March 06, 2006 - 01:56 pm:        Maybe try click on ?   Stricnine Posted on Monday, March 06, 2006 - 05:02 pm:        Good Advice   3boyz Posted on Tuesday, March 07, 2006 - 12:54 am:        The porting would be comparable to a stage two or three. Porting is done mostly according to valve size, the rest of the upgrades make up the "stages". I ran .585 lift cams with these heads with a 15 degree piston. I could resurface the heads on our Bridgeport for you if you would like. You would just need to check clearances and run a thicker gasket. ROB

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: