Author |
Message |
Joedg39
| Posted on Saturday, February 18, 2006 - 11:39 pm: |
|
so i started my bike after about a couple of months due to rain and it runs only on rear cylinder i thought it was the plugs so i bought new ones and replaced them also replaced the coil wires and it still runs on rear only , any and all suggestions very helpful! |
Cataract2
| Posted on Sunday, February 19, 2006 - 08:12 am: |
|
I'm guessing you made certain the front plug wire was seated on good and snug. If all else the only thing I can think of being wrong would maybe be the coil itself. (Message edited by cataract2 on February 19, 2006) |
Joedg39
| Posted on Sunday, February 19, 2006 - 11:34 am: |
|
yes the front plug wire is seated , so if the coil is bad does that mean the ecm is bad too? |
Joedg39
| Posted on Sunday, February 19, 2006 - 11:36 am: |
|
Yes it is seated . So if the coil is bad does that mean that the ecm is bad too? |
Cataract2
| Posted on Sunday, February 19, 2006 - 06:56 pm: |
|
No, might just mean the coil is bad and that's all. Check the connection to the coil though. I see you have an 04 XB. Are you still under warranty? |
|