Author |
Message |
Essthreetee
| Posted on Friday, February 10, 2006 - 06:09 pm: |
|
Should be spewed out into a catch can???? Will it be more if I ride it in the cold??? I commute to work, not far but needed for the smile, and I am getting a BUNCH of white frothy crap (much like the foam on a LATTE). In the mornings it is anywhere from 34* - 40* during my ride. Am I getting normal stuff??? If so, I can't believe that this was just re_directed back into the intake....GROSS...NASTY... Thanks in advance. Jason |
Buellistic
| Posted on Friday, February 10, 2006 - 06:34 pm: |
|
WATER CONDENSATION !!! |
Essthreetee
| Posted on Friday, February 10, 2006 - 10:04 pm: |
|
Soooooooo...is that a yes there will be more in the cold temps....and the amount I am getting out of my bike IS normal???? |
Buellistic
| Posted on Friday, February 10, 2006 - 11:12 pm: |
|
From what you have said it is normal ... "i" took a ride from Tampa to DAYTONA Thursday which was a fairly cold day for FLORIDA ... Took off the INSPECTION,cover clutch and it had some of the "white frothy BUELLschitte" which "i" just wiped it out and put it back together ... "YES" |
Essthreetee
| Posted on Friday, February 10, 2006 - 11:24 pm: |
|
OK..thanks LaFayette. |
Ryker77
| Posted on Saturday, February 11, 2006 - 01:48 pm: |
|
sometimes a high oil level can cause an increase in foam. I run a larger oil filter.. and use the same amount of oil. But less oil is in the oil tank. thus no foam. |
Buellistic
| Posted on Saturday, February 11, 2006 - 01:52 pm: |
|
Does anyone need me to e-mail them HOW TO CHECK YOUR OIL 101 ??? Ljenne73c@verizon.net |
Sloppy
| Posted on Sunday, February 12, 2006 - 01:00 am: |
|
Instead of having it dump in your intake, you can route the breather hoses out to the rear next to your transmission breather hose. Connect a filter midway to prevent anything from getting into your engine. Every morning I get a "spits worth" of latte when I start up the bike. |
Essthreetee
| Posted on Sunday, February 12, 2006 - 11:42 am: |
|
I have the hoses re-routed with the filter...The reason I am asking is because I am getting quite a bit of latte. At next oil change (soon) I will be VERY careful to add the exact required amount... I thhink I did last time (but who knows)...and see if that changes it. |
Sloppy
| Posted on Monday, February 13, 2006 - 12:46 am: |
|
In my case the oil level makes absolutely no difference. I do notice a difference depending upon ambient conditions, however. Cool, foggy mornings typically make more "latte" than dry, warm days. I'm glad you coined the term "latte", I'd still be using the term "snot". |
Natexlh1000
| Posted on Monday, February 13, 2006 - 09:24 am: |
|
Mine has always puked its fair share from day one. In the end, I ended up routing it to the street right in front of the rear tire. And no, one drop per 10 miles is not going to mess with my traction. I used to route the end of the tube at the end of my ehaust with the idea that it would be blased clear of the bike at speed. Nope! It just airbrushes the back of the bike with the slipstream. |
Denfromphilly
| Posted on Monday, February 13, 2006 - 01:04 pm: |
|
When I drain my catch can I don't get a lot of frothy white stuff but the majority of what comes out is water. |
Djkaplan
| Posted on Monday, February 13, 2006 - 04:27 pm: |
|
It's so easy to fab a proper catch-can, there is no reason to vent the breather lines to a simple filter and then out behind the bike (easy, but it never worked well when I tried it). I made my catch can for less than $5 and it works as well as anything commercially available. No mess, no oil getting on the bike or rear tire, and minimal spooge issues. Look in the KV under "Breathers" for any number of ways to do it. One of the quirkiest uses a tomato can, but I bet it works as well as the high-dollar jobbies. This is the one area I think Buell riders should show their imagination and fabrication techniques. At the last March Badness, a bunch of us had a great time looking at each others set-ups and marveling at the improvisation. All were different, but they all worked great. I even picked up a few tips on how to make my system even better (thanks Buellish). |
Seth
| Posted on Monday, February 13, 2006 - 04:49 pm: |
|
You might not be give the motor enough time to get nice and warmed up; warm enough to heat the oil up and cook all the condensation out of the engine and oil. I'd bet (not that I'm a betting man) that if you were to either take the bike on a nice l-o-n-g ride or just change the oil, your foamy problem would be history. |
Seth
| Posted on Monday, February 13, 2006 - 04:54 pm: |
|
p.s. I made my puke can out of an 11oz. camping fuel bottle; zip-tied to the battery mount strap. |
Benthealien
| Posted on Tuesday, February 14, 2006 - 12:58 am: |
|
REPLACE THE SEAL BEHIND YOUR STATOR AND IT WILL GO AWAY |
Buellistic
| Posted on Tuesday, February 14, 2006 - 07:56 am: |
|
REMEMBER THIS: YOUR ENGINE MUST GET HOT ENOUGH TO EVAPORATE THE CONDENSATION IN YOUR ENGINE OR YOU WILL GET THE WHITESH LATTE !!! ie: on a cold day ride, being an air cooled engine it will run TOO COOL !!! |
Essthreetee
| Posted on Wednesday, February 15, 2006 - 12:26 am: |
|
Ding Ding Ding...We have a winner. Seth & Buellistic must have hit it on the head. I went on a nice Long & Spirited, up and down the mountain ride yesterday...at the top of the mountain I drained my catch "tube" (It was full). When I got home, nothing was in it...after riding back and forth to work today...still nothing. I guess I just needed to "clean it out"...as my Father-in-Law would put it. |