Author |
Message |
Roly
| Posted on Saturday, February 04, 2006 - 03:01 pm: |
|
hi i want to pull the carbon frame sliders off,do you think it will pull the paint off the frame ,,TEARS.the frame rubber pucks are going back on,do i use glue pads as supplied or silicone, any ideas thanks. |
Wyckedflesh
| Posted on Saturday, February 04, 2006 - 04:07 pm: |
|
Thats powder coating and not 'paint'. Just use a blowdryer/heatgun to warm the adhesive so it cleans up nicer. 3M Automotive trim adhesive sprayed onto the gluepad of the framepuck should work just fine. |
Cmm213
| Posted on Saturday, February 04, 2006 - 04:10 pm: |
|
I used a heat gun on my frame pucks before sticking them on and they are on rock solid. |
Buelldyno_guy
| Posted on Saturday, February 04, 2006 - 05:46 pm: |
|
There is a Buell P/N for the silver XB frame paint. ... Terry |
Cygnus_x1
| Posted on Saturday, February 04, 2006 - 08:50 pm: |
|
Do ya want to sell the sliders? |
Roly
| Posted on Sunday, February 05, 2006 - 03:55 am: |
|
hi thanks for the info, the sliders may go back on next winter for extra protection so they won't be for sale. roly |
|