Author |
Message |
Hlguthery
| Posted on Friday, January 06, 2006 - 08:05 am: |
|
I have... 2 stock headers (both in great condition one has less then 100 miles the other around 5000) $75 for the like new $50 for the other 1 stock exhaust canister (muffler) $50 1 Vance and Hines canister (muffler) NOT IN THE GREATEST OF SHAPE. $50 1 1999 Frame (with title) MAKE OFFER 1 2001 Frame (with title) MAKE OFFER 1 Aluminum swingarm (tabs for the inner fender have been removed) $100 2 Oil tanks (free with other purchase) I have many other parts email me with what you are looking for and I will check and see what I have. Thanks Harley |
Jeremy_02_x1
| Posted on Friday, January 06, 2006 - 11:31 am: |
|
What years would that V&H muffler fit? I have a 2002 with DDFI. Thanks, |
Bushpilot
| Posted on Friday, January 06, 2006 - 11:42 am: |
|
I know you said make an offer on the frames. Please PM me with an idea of what you would like. Thanks, HOSER |
Jeffb
| Posted on Friday, January 06, 2006 - 04:58 pm: |
|
I am interested in one of the frames. Email me at jbailey@sscycle.com Thanks Jeff |
Jsunstar
| Posted on Friday, January 06, 2006 - 06:15 pm: |
|
i have a 99x1 frame without a title if anyones making a drag bike...cheap. not trying to step on toes, just thought this would be a good place. jason |
Crux
| Posted on Saturday, January 07, 2006 - 12:28 am: |
|
sent PM bro... |
Bensford66
| Posted on Sunday, January 08, 2006 - 10:28 pm: |
|
Do you have the hand and foot brake levers? |
Johnson109
| Posted on Monday, January 09, 2006 - 04:04 pm: |
|
Do you have an ECU that's had the mapping corrected on it, or a race ECU for sale? I recently purchased a 2000 X-1 that still has one of the ugly behaving ECUs still installed. |
Mmmi_grad
| Posted on Tuesday, January 10, 2006 - 05:38 pm: |
|
What is this about ugly mapping , does a stock 2001 ecm need a new factory map??????????? |
Mmmi_grad
| Posted on Tuesday, January 10, 2006 - 05:46 pm: |
|
I have a 2001 red tank cover and front shield for sale in excellent shape about 1000 miles on them. |
Johnson109
| Posted on Wednesday, January 11, 2006 - 08:26 am: |
|
Mike, the 99 and early 00 injected bikes had issues with the ECU mapping that had Buell scrambling to make corrections. It was characterized by stable throttle engine surging, usually at slow speed but could also cause stuttering when the throttle was rolled on rapidly. Some folks referred to it as "lean surge." This X1 I have does that very thing and I have gone through everything else and only recently became aware of this early ECU mapping problem. Your 01 should be good as far as I know. Do you have any of the problems I described with your bike? |
Darktwin79
| Posted on Wednesday, January 11, 2006 - 09:13 pm: |
|
SENT YOU A PM |
Hlguthery
| Posted on Friday, January 13, 2006 - 07:53 am: |
|
UPDATE:---ALL PRICES PLUS SHIPPING--- Race Only ECM---$150 Carbon Fiber Undertail (includes stainless tag bracket)---$150 Wiring Harness (almost uncut)---$50 99 tank cover (missing one tab) Yellow---$50 99 fairing (over headlight) Yellow---$50 99 Guages (I think it has around 7000 miles)---$100 Front brake master cylinder (with lever)---$50 Rear brake master cylinder (with pedal and some rash)---$40 Passenger peg mounts (several)---$20 Fuel tanks with fuel pumps but NO aluminum gas cap or ring---$25 Aluminum swing arm includes axle and plate that bolts to engine (is missing tabs for rear fender)--$75 Stock headers (have one with O2 sensor)--$50 Seat ---$50 Aluminum tail section (1999)--$75 99 shock (with front mount--$75 I think this is about all I have. Good luck. (Message edited by hlguthery on January 13, 2006) |
Rock
| Posted on Friday, January 13, 2006 - 04:20 pm: |
|
2000 X1 header (stock) for sale. 3600 miles from new. $40 + actual shipping. |
Sjh
| Posted on Saturday, January 14, 2006 - 03:33 pm: |
|
Rock, I will take the header for 40.00 PM me with your info, or a number to contact you |
Jeffb
| Posted on Thursday, January 19, 2006 - 10:17 pm: |
|
I got the frame. Thanks for packing it well. Thanks Jeff |