G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Elmariachi Posted on Friday, January 06, 2006 - 09:23 pm:        Hey. I'm having problems starting my 98 S1W. When I hit the ignition switch all I hear is a "clicking" noise. The crank doesn't turn at all. I replaced the battery and voltage regulator and I'm still having this problem. Any ideas?   Natexlh1000 Posted on Friday, January 06, 2006 - 09:39 pm:        Go through your fusebox and clean the contacts. make sure the big ground wire is in good shape and is fastened to the engine case tightly. I don't know if your fusebox has them but mine has two black relays. One of them controls my starter solenoid. My X1 was going clikkkkk and my fusebox contacts were fuzzy. Cleaning them fixed my problem.   Blake Posted on Saturday, January 07, 2006 - 12:22 am:        Agreed. Thanks Nate!   Dave Posted on Saturday, January 07, 2006 - 11:25 am:        Check the big ground strap under the rear tail/swing arm area. Remove, clean, & retighten. DAve

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: