G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Eurotwins Posted on Saturday, December 10, 2005 - 09:42 am:        I,m going to install the black levers that I bought from Daves. Any tricks or tips I need to know first? Thanks,John   Daves Posted on Saturday, December 10, 2005 - 09:45 am:        Real easy job. Just loosen the clutch cable slack at the rubber boot covered adjustment at the front of the engine.   Lovematt Posted on Saturday, December 10, 2005 - 09:49 am:        I greased the CRGs I got at the pivot point, rubbing point (on brake lever), and any other points that might move relative to each other. Just use a medium weight grease with a light film where it is exposed and a fair amount around the pivot. It has been about 6 months since the initial install and still looks pretty good...I'll probably clean/re-lube at the next oil change just for good measure.   Eurotwins Posted on Saturday, December 10, 2005 - 11:28 am:        Thanks, Took about 15 min. including adjustment of clutch. Dave they look great....John

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: