| Author | Message | ||
     Buell_892 |
I forgot where everyone said they got their barend mirrors, I really need to get a set, and i can throw them on my new bars that Ill get in a few days after i make a decision  | ||
| Black_sunshine |
www.rei.com or any good Bicycle shop. 3rd eye bar end. $5.  You'll have to modify them to fit in the end of the Azonic bars cause the hole is smaller. | ||
| Buell_892 |
hmm, they are $14 on that rei.com ... i think ill see if i can find them at a local bike shop cheaper | ||
| Gentleman_jon |
If I remember correctly, ( always a long shot:-), the Cat's eye mirrors come with two rubber inserts, one fits inside the Azonics just right:-) | ||
| Tq_freak |
you are correct, they do come with two sets of rubber inserts  | ||
| Hanses25 |
CRG bar ends from www.bevelheaven.com I got the 2" for $130 to my door.... I know, I know way more money than the third eye but I ran the third eye's one for around 3 months and I have to say I never have regretted parting with my money for the CRG's it is well worth the money in my book.... | ||
| Otobot21 |
Bar End Mirrors are definitely the way to go. It's so much more sporty looking and serves its purpose really well. I got mine thru americansportbike.com. You would need to get the adapters w/ each purchase but it is definitely worth it. Very sturdy and no vibrations. They carry two different kinds. The regular one, and another that has a joint pivot for those of you in tight places. Good Luck!!! | ||
| Trojan |
How about these bar end mirrors from Rizoma? Very well made and don't add too much to the width of the bike either.   | ||
| Peanut_man |
Those are some sweet looking mirrors, where do I get a pair?  | ||
| Glitch |
where do I get a pair? http://www.trojan-horse.co.uk/ | ||
| Buell_892 |
I agree, I like those.. tho i cant really get an idea of how far they stick up liek the stock ones... i assume a whole lot less. Also I didnt find them on the website listed... direct link to them.. or a price? | ||
| Drift |
Trojan, how do those mount? Is there an insert that they clamp to. How much are they to Usa. | ||
| Buell_892 |
same question as above!! | ||
| Glitch |
For some reason I can't post the link.  | ||
| Trojan |
You need to have bar ends installed to fit these mirrors. Our web site is experienceing some problems today and it appears that the whole category has disappeared!  This will hopefully be fixed by tomorrow (or heads will start rolling) and you will be able to find them in the 'Other' category. If all else fails drop me an e-mail at sales@trojan-horse.co.uk Price for these mirrors is UK£59.57 each (approx US$104) but they are all billet and luvverly. Bar ends are £10 (US$17.50). Both are available in black, polished or natural aluminium. | ||
| Buell_892 |
how much in US is 59 in UK... ? im stupid I know.. lol | ||
| Dwolk |
The CRGs from American Sportbike, and the bar-end adapters I bought are really first rate. They also arrived with the plugs to seal up the stock mirror fitting. Also came with a friendly conversation about tightening the mirrors in the right way. Good experience all round. IMHO. | ||
| Tommy_k |
I second, uh third the CRG's! Really well made, NOT plastic like the cheap bike mirrors. Do NOT flop over in the wind, and do NOT vibrate at all. DO look cool as hell though. Plus, they are a clamp mount so you can mount them on a bar end, or on the bar itself...up to 7/8's I think. Also, I know one guy who runs one inboard by the pods, and looks back through/under his arm, instead of around. I just installed Renthal Ultra-lows which are an inch wider than stock, so I mounted everything with a 1/2" space on the ends to mount the CRGs. Works and looks awesome. Shoot me a pm if you want to see a pic. TK | ||
| Jerseybuell |
CRG's from American Sport Bike are well worth the money spent.. | ||
| Kccyclone |
I agree that the CRG mirrors are the way to go, however bevelheaven.com has the best prices I've found...130$ to the door which includes both mirrors and bar end adapters... | ||
| Dana P. |
I've had CRG's on the last Buell also.Wouldn't have it any other way.  | ||
| Ryker77 |
has anybody seen a Buell with Barends that used the OEM mirror mount location for mounting extra lighting? Some small 2" running lights would add some saftey and light output...? | ||
| Buell_892 |
Dana are those teh 2" or 3" bar ends? | ||
| Chainsaw |
Anyone know offhand of bar ends mirrors that fit 1" HD bars? | ||
| Sped214 |
What're you guys using to plug the holes left from the old mirror mounts? I've searched both the Home Depot and Lowes, and they don't have anything that would work and look good at the same time (or they're hiding it really, really well). | ||
| Glitch |
The Cat Eye ones will work. Not the ones like Black_sunshine's, but the one like Tq_freak's. They come with two sets of inserts. | ||
| Drift |
Yea, I had those. I don't like the extra width it adds to the bar end. I was always whacking them around on stuff. Right now, I'm using the old turn around and look method. | ||
| Typeone |
I have the same issue as Drift, I don't like the mirrors sticking way out like that. Can you turn the CRGs down like I use my Cat Eye upside down? (complete reverse from what B_S has) | ||
| Drift |
yep you can | ||
| Dana P. |
Buell892 they are 2 inch. | ||
| Kowpow225 |
Hey hoosier! Give these a look. Theres another slightly less visible pic in my profile.  | ||
| Buell_892 |
Hey, for the question about pluggig the left over hole from the old mirror spot, if you go to any HD dealer, and ask them, they will have a plug that fits in there nicely.  |
