G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archives OSB 001 » Archive through November 02, 2005 » S1 - oil puking problem » Archive through October 12, 2005 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ezetobebad__uk
Posted on Tuesday, October 11, 2005 - 03:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a 1997 S1, recently kitted with NHRS XL2004 stage 3 heads (dual plugged & 11.5 comp),.585 cams, 1250 kit.

I have covered 500 miles running engine in with no aparent problems. Yesterday I went for a 20 mile ride & the thing suddenly pissed loads of oil out of the head/rocker breather pipe. I got home & refilled it with 750 ml/cc of oil..that was a lot of oil ...it covered me, the bike' the rear tyre & the road. I took bike out & the same problem occured, it seems to be happening at 4000+ rpm under moderate accleration conditions.

I am currently using 1997 S1 oil pump & I am not using the XB rocker covers.

WHAT CAUSED THIS PROBLEM TO OCCUR?

WHAT CAN I DO TO CURE PROBLEM?

Any help is greatly received... I am at the end of my tether with this happening after I have spent vast sums of money on the bike.


thanks eze
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Tuesday, October 11, 2005 - 04:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Eze:

Check out the service manual on oil flow:

http://www.badweatherbikers.com/buell/Manuals/S1_1996-1997_Service/BU3b.pdf

Oil is not draining back down from one or both of your rocker boxes to to the main sump. It's got to go down either through the pushrod tubes, or through the passage referred to in #14 on the link above.

If it were my bike, I think I'd pull the rocker boxes and make sure my umbrella valves are in good shape, check to see that all gaskets are installed properly so as not to block any drainbacks, and make sure there's no debris obstructing the push rod tubes or the cylinder drainbacks.

Check the Knowledge Vault for information, too:

http://www.badweatherbikers.com/buell/messages/3842/6804.html?1124593131

Hope this helps!

rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Peter
Posted on Tuesday, October 11, 2005 - 04:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

How do you have the breathers setup?
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Tuesday, October 11, 2005 - 06:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You're right, Pete, that should have been my first thought.

rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Tuesday, October 11, 2005 - 06:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

don't feel too bad. My stage 3 xb heads have something wrong with the front valve seals. either ripped or mushroomed. Fouls front plug and smokes on decel of rpms.



(Message edited by ryker77 on October 13, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Pammy
Posted on Tuesday, October 11, 2005 - 08:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Building too much crankcase pressure will cause the overflow as well. Blow by past the rings will cause something like that. Since it happened AFTER 500 miles, I would check for scuffing.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bubabuell
Posted on Tuesday, October 11, 2005 - 09:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

How was it running before?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ezetobebad__uk
Posted on Wednesday, October 12, 2005 - 02:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

How do you have the breathers setup?


The breather pipes are pointing down & connect at bottom with k&n type filter. The first cure will be to point breathers up under the tank & then down left side of bike into catch can}

}how was bike before
bike was fine, prior to engine upgrade I never experienced any crankcase pressure problems

}could be a problem with umbrella valves
It could be but i believe new ones were installed
}could be blowby
could be, but i doubt it at 500 miles
}contact NHRS for advice
I will attempt to contact NHRS asap, it is difficult to do so due to work commitments & time zone differential.In all honesty perhaps NHRS should have been my first port of call for help.

thanks for the help folks
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 07:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

edited out by me.

(Message edited by ryker77 on October 13, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 09:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

All I can say is I got kinda shafted buying a used bike with performance mods allready installed.

(Message edited by ryker77 on October 13, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Court
Posted on Wednesday, October 12, 2005 - 10:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

>>>.offering what I consider to the best customer service ever.

Typical Aaron.

He has my bike now.

Don't get me wrong. This is not a "relative position" marker. I'd have no hesitation in having my bike in the hands of Wes Brown or Ron Dickey either. There is a lot of talent out there.

Court
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Wednesday, October 12, 2005 - 11:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

But Aaron won't contribute to the BadWeB because Blake questions a BadWeB contributor / NRHS customer with regard to a similar matter / incident, yet here we have Aaron making out butter wouldn't melt in his mouth.

It's widespread knowledge about the tooing's and froing's of NHRS / NRHS and it seems every opportunity available Aaron is there waiting to proclaim his Sainthood.

Put it this way. NRHS have just made it public knowledge via BadWeB that Ryker's stage 3 heads are in some way involved in some bad blood that involves no one here and the only benefit of doing so from what I can see as an outsider is to make NRHS look good. This wouldn't be such a bad thing if NRHS were board sponsors still or hadn't fallen out with Blake over such similar matters, but they have so why the post here?

None of my business but someone needs to say it seeing as no one else will. There's a dark side at work here but some only choose to follow the light in which case it's possible one could be mislead.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Wednesday, October 12, 2005 - 12:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I found it interesting that Aaron, placed on his business site an apology related to problems with customer service prior to his take over of the business. Including a number of things that most small business owners would consider "damning".
Whether or not he had any thing to do with the issue directly he has made an effort to "make it right" In this day and time that is not a common action. The act should be applauded,
Maybe some time when the issues related to his departure from this community subside he may elect to join us again as a sponsor I for one would welcome that, We are fortunate to have a number of folks that are reputable and in the know about high performence, his return would increase that number, What was done in the past can't be un done and dwelling on it benefits no one.
I seem to recall reading that Mr.Wilson has also been generous and hospitible to a number of members of this community in the past. Even though I have never met him it speaks volumes about what kind of person he is.
Top of pagePrevious messageNext messageBottom of page Link to this message

Court
Posted on Wednesday, October 12, 2005 - 01:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

>>>.Mr.Wilson has also been generous and hospitible to a number of members of this community in the past.

Nearly beyond reason, and we'd be remiss in not inlcuded wife Susan as well.

Aaron has always, I've known him longer than many hear, stepped up to the plate well before the need was often perceived.

If's just my PERSONAL OPINION, but wether it's been donating a bike to the Guggenheim so that Buell could be represeneted when Barber needed thier bike back, stepping up to foot the bill to bring folks to the US or paying thousands of dollars of a Buellers personal bills, expecting nothing in return, when the guy fell on hard times...is just the way I've come to see Aaron and Susan.

Let me finish by saying I'll state my opinion here as is within my bounds, but I won't debate it. Differnet folks will certainly harbor varying opinions to which they are entitled. Mine's here not to be confirmed or refuted, just simply stated.

Court
Top of pagePrevious messageNext messageBottom of page Link to this message

Peter
Posted on Wednesday, October 12, 2005 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

My dealings with Aaron in business, and as a friend, have been beyond reproach. He and Susan are good people.

To keep a balanced point of view, my dealings with Pammy and Wes have also been superb. In my opinion, also very good people.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 01:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Seams like Buell riders have some of the BEST performance builders. This is not the case with other bike brands. We are lucky.

I don't care what has happened in the past. Mostly because I don't know what happened. All I know is that Aaron is going above and beyond with his customer service.

I've also been around on the internet car, bike, and bodybuilding chat boards long enough to know that a few key people can post one sided facts to bias the $$$$$ flow to one side. So I take what mods, vets, gurus, admin etc etc have to say about a competior with a grain of salt.
Top of pagePrevious messageNext messageBottom of page Link to this message

Madduck
Posted on Wednesday, October 12, 2005 - 01:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Can we not restart the war of words again. Blake and Aaron are both good people and can work out whatever problems on their own, better without any of our "interventions". Both expend considerable "resoursces" making our lives a lot better, each in their own way. Aaron is in business and will make whatever decisions he has to to keep his business functioning. I appreciate everything he has done in the past and hope he will continue. I have a tremendous admiration for anyone who strikes out and tries to build something like NRHS. Its real hard and 90% will fail in their first year.
Top of pagePrevious messageNext messageBottom of page Link to this message

Djkaplan
Posted on Wednesday, October 12, 2005 - 04:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

No experience with Aaron or NRHS, but I have NRHS billet parts I bought from American Sport Bike, and the quality is top notch (and reasonably priced, too).
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Wednesday, October 12, 2005 - 05:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Can we not restart the war of words again.

NRHS have just made it public knowledge via BadWeB that Ryker's stage 3 heads are in some way involved in some bad blood that involves no one here AND the only benefit of doing so from what I can see as an outsider is to make NRHS look good.

Depends where you draw the start line Paul?

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Wednesday, October 12, 2005 - 06:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thank you Rocket. Very well put. I used to be one of those following the light wrt this issue. Unfortunately I've since learned with much heartaches and consternation exactly what you put so well into words.
Top of pagePrevious messageNext messageBottom of page Link to this message

Blake
Posted on Wednesday, October 12, 2005 - 06:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Brian (Eztobebad_uk),

I agree, the best first avenue for resolution is with the vendor. I'm sure NRHS will do their best to help resolve your problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 06:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

deleted

(Message edited by ryker77 on October 13, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Wednesday, October 12, 2005 - 07:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Not to mention the free advertising he's just bestowed upon himself.

Listen mate, dress it up anyway you like, Aaron wasn't just defending his GOOD name. He was doing so publicly at someone else's expense, as he stated in his post. There are lots of us here who know exactly who he is pointing the finger at. Right or wrong who cares, but it is with similar circumstance that Aaron chooses not to contribute on BadWeB any longer. That's his choice but it isn't at all fair that he chooses to breeze in to defend his GOOD name whilst wagging his finger at someone else when he feels it necessary, especially since he's now preaching his Buelling skills over on SACBORG rather than here on the BadWeB. The way I see it is it's a poke in the eye to BadWeB and Blake too, who it has to be said has gone out of his way to accommodate Aaron's participation back on BadWeB to no avail. Hey and whilst we're at it let's remember that without BadWeB Aaron wouldn't have been fortunate enough to milk the Buell world as well as he has. Fart Smella that Aaron bloke.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 07:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I don't spend every second of the day on this website. so I havn't got much of a clue as to who you say he is pointing a finger at, nor do I care. my problem is current and what has happened in the past perhaps should stay in the past.

I see that somebodys posting has been deleted. I wonder how much censorship takes place on this board. Whats the other websites for Buells. Not sure I like all of this bickering and one sided censorship.

Could you respond to my head removal problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pammy
Posted on Wednesday, October 12, 2005 - 08:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ryker, you could take the (front and top)motor mounts loose(with a jack under the motor) and just lever the motor up and down as needed for head removal. That's what I do.

I would imagine that NRHS has removed their own post. I have seen no censorship on this particular thread.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pammy
Posted on Wednesday, October 12, 2005 - 08:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

A scissor jack is what I use and then just wind it up and down. Makes things a whole lot easier.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 08:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

so the xb fins fit through the top of the frame. If the fins were just about 3/8 shorter it would fit right through.

Pammy your from down in Fla. I had thought about once I fix my head issues. riding my bike down and getting it tuned properly. Since your the closest and fla has much warmer weather than Wisc. or Colorado.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pammy
Posted on Wednesday, October 12, 2005 - 08:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

There is a product out called direct link that we can use to tune the Buells(I haven't tried it yet). I just put a carb on mine. the fuel injection isn't very receptive to performance mods.

P.S.I am actually originally from North Ga.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryker77
Posted on Wednesday, October 12, 2005 - 09:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Blake Ok I see that side, too. thanks for your input and lengthy posting. I don't have enough insider information to pass judgement. I am just thrilled that Aaron is helping me out.

Pammy, I have converted my X1 to hsr42 and twin tec ignition. Thus it should be a simple tuning job. Though the 12:1 domed pistons and the desire to run pump gas could be a slight challange.

back to my current problem.. those XB fins are too large to pull through the x1 frame. This is with the intake port facing straight up. any tips.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Wednesday, October 12, 2005 - 09:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ryker I'm pleased that Aaron has stepped up for you.

I can't answer your head removal problem because I don't have a X1 frame or XB heads but I do know Pammy and she is not a smart fella - just smarter than most fella's.

Rocket
« Previous Next »

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration